Performance Analysis of Mass-Produced Nb3Sn Conductor for Central Solenoid in ITER
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Cabled conductors based on Nb3Sn technology with operating current in the range of 20 kA and above are mainly restricted to fusion magnets and high field facilities. The experience of last decade has dramatically shown that, opposite to the NbTi conductors ...
The Superconducting Fault Current Limiter (SFCL) appears to be a device of great interest to efficiently build the electrical grid of tomorrow. With the recent progress made by the superconducting wires manufacturers, there are needs coming from the indust ...
A short sample of the NbTi cable-in-conduit conductor (CICC) manufactured for the ITER PF insert coil has been tested in the SULTAN facility at CRPP. The short sample consists of two paired conductor sections, identical except for the sub-cable and outer w ...
This paper focuses on the experimental determination of the electrical resistance (R) of commercial high temperature superconductor (HTS) coated conductors (CCs) at currents well above the critical current. The major novelty of this work rests on the uniqu ...
The use of high temperature superconductor (HTS) materials in future fusion machines could increase the efficiency drastically, but strong boundary conditions exist. To outline the prospects, challenges and problems, first the benefit of using HTS material ...
We present momentum widths and mean kinetic energies of lithium and fluorine in 7LiF, as determined simultaneously from deep inelastic neutron scattering (DINS) measurements. Experimental data across a temperature range from 4 to 300K are presented, and th ...
The coupling current loss in rectangular superconducting cables is strictly dependent on their aspect ratio, which has an impact on the area linked by the field variation and consequently on the currents induced between strands. The relation between the ac ...
In the framework of the ITER qualification tests the second Chinese sample (CNTF2) was tested in the SULTAN facility. The sample was made of two identical ITER TF type cable-in-conduit conductor sections. Internal Sn strands offered by Western Superconduct ...
The Japan Atomic Energy Agency (JAEA) developed ITER TF Nb3Sn conductors that fulfill ITER requirements and has commenced fabricating the conductors to be used in the ITER TF coils. As a qualification of conductor fabrication, two full-size conductor sampl ...
The contact resistance distribution among the current-carrying elements of three ITER conductor terminations is measured in the JORDI (JOint Resistance DIstribution) test facility at CRPP. One sample is based on Nb3Sn strands, the other two are NbTi cable- ...
