Performance Analysis of Mass-Produced Nb3Sn Conductor for Central Solenoid in ITER
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Using 3D finite element method (FEM) modelling, the present work investigates the coupling effect between two finite superconductors through a resistive matrix. This effect, related to the finite length of the conductors, is typically three-dimensional and ...
There is currently both considerable interest in the physics of ELM transport in the scrape-off layer (SOL) and concern over the impact of the ELM power and particle loads on the divertor targets of future fusion reactors. This paper describes some experim ...
The control of the current, position and shape of an elongated cross-section tokamak plasma is complicated by the instability of the plasma vertical position. In this case the control becomes a significant problem when saturation of the power supplies is c ...
This Ph.D. thesis is focused on the development of novel models for calculation of AC losses, current and magnetic field profiles in high-temperature superconductors (HTS). The thesis is concentrated on the modelling of Bi-2223 conductors at 77 K, which fo ...
A 13 T-46 kA Nb3Al conductor with steel jacket has been developed in the framework of ITER-EDA. The thermal strain will appear on the Nb3Al strands after heat treatment, when the steel jacket is used because of difference in their thermal expansion. The co ...
A section of the ITER (International Thermonuclear Experimental Reactor) conductor, left from the winding of the Central Solenoid Model Coil, was tested for stability under pulsed transverse field in the SULTAN facility, at background field up to 11 T and ...
Prototype conductors for the ITER magnets have been tested extensively in the SULTAN facility at CRPP in the last decade. The in-depth characterization of the high current carrying conductors provided a valuable feedback in the design, with performance opt ...
In the framework of ITER-EDA, a 13 T-46 kA Nb3Al conductor with stainless steel jacket has been developed in order to demonstrate applicability of an Nb3Al conductor with react-and-wind technique to ITER-TF coils. Using a 3.5 m sample consisting of a pair ...
SULTAN, the world wide unique, high field, large bore test facility. has been built as European contribution to the development program for ITER, The facility has primarily been devoted to the qualification of full-size cable-in-conduit-conductors (CICC) f ...
A number of pressure drop measurements have been carried out at CRPP on a section of ITER cable-in-conduit conductor, using pressurized water at room temperature. The longitudinal friction factor is deduced for the strand bundle area and the central hole. ...
