Key Energy and Technological Aspects of Three Innovative Concepts of District Energy Networks

Energy needs in urban areas are heterogeneous by their nature, spatial distribution and temperature level required. Three concepts of district energy networks that could provide the energy services efficiently to a city centre are compared. The focus is on the energy and technological aspects. These networks are characterized by similar temperature levels; between 9.5 °C and 18 °C, rely on free cooling for most of the cooling services and use a combination of centralized and decentralized heat pumps to provide the heating services. Two of these concepts exploit the latent heat of evaporation/condensation of CO2 and of the refrigerant R1234yf to store and transfer heat. The third concept is more conventional and uses the sensible heat of liquid water, however with a small temperature spread. The proposed networks allow the waste heat emitted by the users requiring cooling to be transferred and valourised by the users requiring heating, thus reducing the load on the central plant. For the area considered, where the annual heating and cooling demand are 53.1 GWh and 49.4 GWh respectively, the annual electricity required to supply the thermal services amounts to 10.87 GWh for CO2, 10.52 GWh for water and 9.60 GWh for R1234yf. © 2016 Elsevier Ltd. All rights reserved.

Key energy and technological aspects of three innovative concepts of District energy networks

Daniel Favrat, Samuel Henchoz, François Maréchal

In urban areas, the use of thermal energy services is intensive and relatively heterogeneous by their nature, spatial distribution and temperature level required. In this study three concepts of district energy networks that could provide these services very efficiently to a specific area representative of mid Europe (Geneva) are compared. The focus is on the energy and technological aspects related to each of the proposed networks. These networks are characterized by similar temperature levels; between 9.5°C and 18°C, rely on free cooling for most of the cooling services and use a combination of centralized and decentralized heat pumps to provide the heating services. Two of these concepts exploit the latent heat of evaporation/condensation of CO2 and of the HFO refrigerant R1234yf to store and transfer heat across the network. The third concept is more conventional as it uses the sensible heat of liquid water, however with a small temperature spread (2 - 8 °C). The three proposed networks allow the waste heat emitted by the users requiring cooling to be collected, transferred and valorised by the users requiring heating, thus reducing the load on the central plant. For the area considered, where the annual heating and cooling demand are 53.1 GWh and 49.4 GWh respectively, the annual final energy (electricity) consumption required to supply the thermal services amounts to 10.87 GWh for the CO2 variant, 10.52 GWh for the water variant and 9.60 GWh for the R1234yf variant.

2015

Potential of refrigerant based district heating and cooling networks

Samuel Henchoz

Urban areas represent an ever increasing challenge in terms of energy use and environmental impact associated with it. Projections from the United Nation expect this number to reach 66% by 2050. In Europe 40% of the final energy consumption and 36% of the emissions of greenhouse gases are caused by buildings. The building sector is also one of the area where there is a great potential of reduction of the greenhouse gases emissions and of the dependence on fossil fuels. Among the measures that can help realise this potential, efficient energy conversion technologies supplying thermal energy services could play an important role. The present thesis aims at demonstrating the potential of a new type of district network, capable of delivering indistinctly cooling and heating services using a two-pipe network and in which the transfer of energy across the network is done by exploiting the evaporation/condensation of a refrigerant. The main research question is: "Is it possible to build and operate safe, reliable, energy efficient and economically profitable district heating and cooling networks that use a refrigerant as a transfer fluid?" The demonstration followsthree axes, the first being a thermoeconomic analysis. Thisanalysis focuses on a test case area in Genevaâs city centre where 5 variants of refrigerant based district heating and cooling networks, one cold water network and the mix of conversion technologies currently in use are compared on the basis of their energy and exergy performances and on the economic profitability. Considerations on economic uncertainty, safety and technical issues are also included in the analysis. The key findings are: â¢ All the variants of network can potentially reduce the final energy consumption of over 80% as compared to the current situation. â¢ All the variants of network have rather similar exergy efficiencies comprised between 39.5% and 45%. â¢ The most profitable variant uses CO2 as a transfer fluid and an open cycle CO2 heat pump at the central plant. It costs initially between 27 and 35 mio â¬ , reaches break-even in 4 to 6 years and the net present value after 40 years is comprised between 40 and 80 mio â¬. â¢ A cold water network is the second best option, although more expensive initially and thus less profitable, it has several advantages in terms of safety and availability of components. â¢ The CO2 variants exhibit a much better compactness than the cold water network. The second axis is the design, construction and testing of a lab scale refrigerant network. First a description of the design process and of the test facility is provided. It is followed by a presentation of the results of the test campaign. The tests aimed at demonstrating the practical feasibility of the concept, mostly by assessing the controllability of the network. Overall the good behaviour of the test facility and its ability to be smoothly and automatically controlled could be demonstrated, which further improved confidence in the practicality of the concept. The third axis is the development of dynamic models of simulation. These models are described in the present manuscript. They include, heat exchangers, pipes, pumps and valves. A short comparison between experimental and simulation results is also provided. The comparison between experiment and simulation showed that at their current stage of development the models cannot simulate accurately enough a refrigerant based network.

EPFL2016

District heating and cooling energy network using CO2 as a heat and mass transfer fluid

Daniel Favrat, Luc Girardin, Samuel Henchoz, François Maréchal

The 5th generation compact district heating and cooling networks in a temperature range of 10 to 16 °C have a great potential for energy savings by providing a heat source for decentralized heating heat pumps, a cold source for air-conditioning and a heat sink for refrigeration or cogeneration units. The energy balance of the network is achieved by a central plant equipped with a heating heat pump in winter operation and a heat dissipator in summer operation. They typically facilitate the synergy between users and allow the concept of a city without chimneys or cooling towers in the various buildings. One such concept is based on using the latent heat of the transfer fluid (CO2), with one saturated CO2 vapor pipe and one saturated CO2 liquid pipe. Studies show that up to 80 % of the final energy can be saved in urban areas, at a cost that is lower than the conventional technologies.

2018

Potential of refrigerant based district heating and cooling networks

Samuel Henchoz

EPFL2016