The Origin of the Catalytic Activity of a Metal Hydride in CO2 Reduction

Atomic hydrogen on the surface of a metal with high hydrogen solubility is of particular interest for the hydrogenation of carbon dioxide. In a mixture of hydrogen and carbon dioxide, methane was markedly formed on the metal hydride ZrCoHx in the course of the hydrogen desorption and not on the pristine intermetallic. The surface analysis was performed by means of time-of-flight secondary ion mass spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy, for the in situ analysis. The aim was to elucidate the origin of the catalytic activity of the metal hydride. Since at the initial stage the dissociation of impinging hydrogen molecules is hindered by a high activation barrier of the oxidised surface, the atomic hydrogen flux from the metal hydride is crucial for the reduction of carbon dioxide and surface oxides at interfacial sites.

High-pressure NMR spectroscopic and calorimetric studies on formic acid dehydrogenation and carbon dioxide hydrogenation

Cornel Fink

Our current energy production is convenient and simple, but it is not sustainable. The negative impacts on our environment are omnipresent in the form of smog, extinction of species, and global warming. A major challenge of our generation is the transition to new, responsible methods of energy production. The maxim is renewable energy. Hydrogen could serve as an intermediary energy carrier. However, problems arise with the storage of hydrogen due to safety concerns and low volumetric energy density. The reduction of carbon dioxide (CO2) to formic acid (FA) is an elegant process to âcompressâ hydrogen by transforming it into a chemical which is easier and safer to handle. In this dissertation, catalytic FA dehydrogenation, CO2 reduction and calorimetric studies of the involved thermodynamics are described. The first chapter provides a global overview, beginning with general considerations about energy economy, then crossing over to hydrogen storage and infrastructure for a future hydrogen economy, before discussing FA as a hydrogen storage medium and summarizing the developments of FA dehydrogenation and CO2 hydrogenation. Chapter two describes different compounds we have studied as potential catalysts for FA dehydrogenation and CO2 hydrogenation. The focus is on complexes of Ir, Rh, and Ru regarding metals, and on Cp* and an ethylene-spaced diamine as ligands. Other motifs were also explored including Ru-phosphine complexes which afforded unexpected results. The most promising candidates are examined more closely. The third chapter summarizes our findings of formic acid dehydrogenation with homogeneous catalysts, presented in three parts. Each subchapter highlights a different structural feature or metal center. The first one focuses on Ir and Rh metal centers, equipped with Cp* and diamines. In the second section, we explore the catalytic performance of a RAPTA-type precatalyst, and the last one addresses our achievements with a rhodium catalyst containing Cp* and di(1-pyrazolyl)methane ligands. The catalysts were evaluated towards core properties such as stability (TON), activity (TOF) and recycling. Chapter four elucidates the interactions of FA with different solvents and additives, which influence the kinetics and thermodynamics of FA dehydrogenation and CO2 hydrogenation. NMR and FT-IR spectroscopy, conductometry, calorimetric measurements and computational methods were used to analyze the systems thoroughly. In chapter five, high-pressure calorimetric measurements are employed to quantify the actual energy balance during the endothermic process of FA dehydrogenation. For this purpose, we modified an off-the-shelf high-pressure reactor to suit our needs and constructed a thermo-controlled environment. Chapter six describes our research into catalytic CO2 hydrogenation to FA with two ruthenium-based phosphine pre-catalysts. One has three 1,4,7-triaza-9-phosphatricyclotridecane (CAP) ligands coordinated, which is a just recently described phosphine compound. The other complex is prepared via a straightforward synthesis route with an inexpensive, simple ligand. Both are stable in aqueous FA over weeks, making them potential catalysts for large-scale application.

EPFL2018

Mechanisms of the Heterogeneously Catalyzed Reaction of CO2 Hydrogenation on Transition Metal Surfaces

Kun Zhao

Renewable energy supply and energy storage in a closed materials cycle are the urgent global challenges of the 21st century. Carbon dioxide (CO2) hydrogenation over catalysts is a method to produce synthetic fuels from renewable energy in a CO2 neutral cycle. Numerous catalysts from pristine to novel materials have been investigated to achieve high CO2 conversion and selective hydrocarbon. Ahead of developing innovatively active catalyst with a high selectivity, it is crucial to understand the active sites and the related reaction mechanisms. Despite the fact that CO2 + H2 is a rather simple chemical equation, many reaction paths on a solid catalyst are possible. However, the proposed mechanisms from literatures have been controversial due to two main difficulties in 1) evidently identifying the reaction species, especially some vital transient species on the pathway of carbon hydrogenation and C-C coupling, and 2) proving the relation between surface structure of the catalysts and the reactivities. To address these difficulties, we built a new instrumental setup and developed an analysis program in order to investigate the catalyst surface and analyze the reaction mechanism in operando. We built up a diffuse reflectance infrared Fourier transform spectroscopy-mass spectroscopy-gas chromatography (DRIFTS-MS-GC) instrument for an operando study of the surface, gas, and liquid products using DRIFTS, MS, GC, and ex situ NMR. A bilevel evolutionary Gaussi-an fitting (BEGF) program was developed for dataset treatment including peak deconvolution and kinetic plot. Standard chemicals like carbonates, bicarbonates, formic acid, acetic acid, methanol, and ethanol, and isotopic spectra using 13CO2 and D2 in the reactions were em-ployed for supporting peak assignments. Based on these infrastructures, CO2 adsorption and hydrogenation reactions on pristine metals (Fe, Co, Ni, and Cu), metal hydride alloy (La-Ni4Cu), and metal-oxide (Co-CoO) were studied. We found out pure Fe, Co, Ni, Cu and La-Ni4Cu metals are not efficient for CO2 hydrogenation, and have no detectable adsorption spe-cies on the surface. High conversion (> 90%) of CO2 on Co-CoO surface emphasized the im-portance of oxide for CO2 chemisorption and for the observations of the surface species. The following investigation on oxide supported metal catalyst Ru/Al2O3 via an in situ control of the individual formation and hydrogenation of each adsorption species demonstrates that the oxide assists CO2 initial activation. CO2 methanation starts at the interface of the metal and the oxide and passes through the steps of CO2 ï® HCO3-* (and/or HCOO-* in CO2+H2 co-adsorption condition) ï® CO* ï® CH4. We further explored the relationship between met-al/(metal+oxide) ratio and their reactivities. We synthesized Co/(Co+CoO) catalysts in the DRIFTS-MS-GC instrument, and investigated the CO2 hydrogenation reaction on site. The results reveal that high concentration of the oxide in the catalyst boosts CO2 methanation, be-cause the CO2 binding is moderate and the adsorption is enhanced when the oxide concentra-tion increased. In short, we established equipment for an operando study of CO2 hydrogenation on catalyst surfaces, unraveled the surface reaction mechanisms and the active sites, developed a highly active catalyst, as well as initiated an efficient data analysis program.

EPFL2020

Decreasing the Stability of Borohydride with Ionic Liquids for Hydrogen Storage and Carbon Dioxide Conversion

Loris Giovanni Lombardo

The world needs to move from a fossil fuel to a renewable energy based society. With the increasing electricity production from wind and PV, short and long term energy storage are becoming one of challenge of the 21st century. While batteries are the preferred method for short term storage, another technology is required for seasonal storage. Hydrogen is a valuable energy carrier owning its high energy density (122 kJ/g). However, compact and safe storage of H2 is challenging. The current solution is to compress hydrogen up to 700 bar for mobile application (fuel cell cars), and metal hydrides for stationary application. Material-based H2 storage avoids using high-pressure cylinder. Complex hydrides are especially attractive for solid-state H2 storage due to their high gravimetric and volumetric hydrogen density. Sodium borohydride (NaBH4) contains 10.6 mass% of H2, but high temperatures are needed to release H2 (505 Â°C) and the reaction is not reversible under moderate conditions. To apply complex hydrides in real applications, they must be modified to improve the kinetics and thermodynamics of H2 desorption. Several possibilities exist such as confinement into scaffolds, catalyst addition, or combination of several hydrides to modify the dehydrogenation pathway. The stability of complex hydrides is determined by the localization of the charge on the central atom of the complex. Therefore, in this thesis the interaction of highly polar or ionic compounds with complex hydrides were investigated. We combine NaBH4 with a special class of organic salts: ionic liquids (IL). Considering their chemical and thermal stability, IL are attractive additive. Using organic additives instead of expensive metal catalysts is another advantage. Two different techniques were employed to combine the IL and NaBH4. The first one consists of mechanochemically milling them to create an interaction between BH4- and IL. The second one is to directly synthesized IL borohydrides ([IL][BH4]) by metathesis reaction. Different ILs, such as vinylbenzyltrimethylammonium chloride ([VBTMA][Cl]), 1-butyl-3-methylimidazolium chloride ([bmim][Cl]), and 1-ethyl-1-methylpyrrolidinium bromide ([EMPY][Br]) were tested. [bmim][BH4] was able to release H2 below 100 Â°C. The hydrogen content ranges between 2.4 mass% and 2.9 mass%. The second challenge of this century is the CO2 problematic. Atmospheric CO2 concentration linearly increases, leading to greenhouse effect. Carbon capture and sequestration (CCS) and utilization (CCU) are primordial research topic to stabilize the CO2 emission. Hydrides are primary reducing agents, thus reduction of CO2 can be accomplished with them. Direct CO2 reduction at ambient conditions is challenging for classical borohydrides. With our [IL][BH4], gaseous CO2 can be captured and reduced under ambient conditions (1 bar, RT). Three CO2 bounds with boron to give triformatoborohydride ([HB(OCHO)3]â. Dilute CO2 (6 vol%) can be used as well. The reaction was followed in real time with a magnetic suspended balance (MSB). Further, CO2 reduction happened when air is used as a carbon dioxide source. Formic acid can be obtained by adding HCl. Thus, ionic liquid borohydrides have great potential as a CO2 absorber and reducer to alternative fuels. In short, we applied ionic liquid to destabilized borohydrides. The resulting materials exhibited potential for solid-state hydrogen storage, as well as CO2 capture and transformation.

EPFL2021