Micromechanical design of hierarchical composites using global load sharing theory
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The behaviour of brittle matrix fibre reinforced-composites is dependent of the properties of its constituents (fibre, matrix and fibre-matrix interface) and is affected by the mechanical and environmental loads. The fracture of a unidirectional composite ...
Polymer optical fibers (POF) have received increased attention in recent years in the fields of data communication and sensing applications. The lower cost and higher flexibility are the main advantages of POF compared to silica fibers and make them intere ...
The statistical strength distribution of Carborundum polycrystalline SiC fibers was derived from the fragmentation process in a single fiber/epoxy composite. We conducted Monte Carlo simulations of the fragmentation process using an elastic-plastic hardeni ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
We present a prototype for the first tracking detector consisting of 250 mu m thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10 mm Rohacell f ...
Biocompatible composites, whose porosity and fibre fraction call be tailored over a large range and whose mechanical resistance is comparable to that Of natural bone, were processed with poly(lactic acid) (PLA) and continuous glass fibres. The processing s ...
A novel thermoplastic programmable preforming process, TP-P4, has been used to manufacture preforms for non-isothermal compression molding. Commingled glass and polypropylene yarns are deposited by robot onto a vacuum screen, followed by a heat-setting ope ...
The effect of wood fiber anisotropy and their geometrical features on wood fiber composite stiffness is analyzed. An analytical model for an N-phase composite with orthotropic properties of constituents is developed and used. This model is a straightforwar ...
The feasibility of integrating thermoplastic isotactic polypropylene/ montmorillonite nanocomposite matrices into conventional fiber-reinforced composites has been investigated. Two basic processing routes were considered: long glass fiber (GF)-reinforced ...
The aim of this study has been to develop processing techniques for novel bioresorbable thermoplastic cellular composites, reinforced with continuous inorganic fibres, for use as biodegradable scaffolds for bone tissue engineering. As the implanted composi ...
