Secondary hardening in Co-Ni-Cr super-alloy investigated by Mechanical Spectroscopy
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys despite the early stages of precipitation are still far from being fully understood. This cruc ...
The recrystallization behavior of an Al-Cu-Mg alloy is investigated in multi-directionally forged over-aged and solution treated alloys, during non-isothermal annealing. Deformation and non-isothermal annealing are performed with a Gleeble 3800 thermo-mech ...
A model is presented to predict the effectiveness of dilute solutes in delaying precipitate formation, with application to natural and artificial aging in metal alloys. Control of aging is achieved via the binding, at natural aging temperatures, and releas ...
Using different homogenization treatments, different initial microchemistry conditions in terms of solid solution levels of Mn, and number densities and sizes of constituents and dispersoids were achieved in an Al-Mn-Fe-Si model alloy. For each homogenized ...
A theory to predict the initial flow stress of an arbitrary N-component fcc random alloy is extended to predict the additional strengthening when a dilute concentration of a substitutional element is introduced. Assuming properties for the N-component allo ...
High throughput first-principles calculations were employed to unravel the thermodynamic stability of two sets of hierarchical phases, β′′′P and β′′′S, in Mg-RE (rare-earth) alloys. The β′′′P orderings (with compositions greater than xRE=0.125) are predict ...
Annealing of supersaturated AA3xxx alloys at low temperatures usually results in sluggish recrystallization kinetics. This is due to the joint effect of the following factors: low nucleation rate, reduced grain boundary mobility, and large amount of fine p ...
Random solid solution alloys are a broad class of materials that are used across the entire spectrum of engineering metals, whether as stand-alone materials (e.g. Al-57xxx alloys) or as the matrix in precipitate strengthening materials (e.g. Ni-based super ...
This study concerns the evolution of the thermomechanical properties of new high-performance materials. In particular, we focus on the relationship between the microstructure and the mechanical properties of a superalloy based on Co-Ni-Cr. Superalloys are ...
An oxide dispersion strengthened ODS ferritic steel has been produced by mechanical alloying of Fe–14Cr–2W–0.2Ti (wt.%) prealloyed powder with 0.55 (wt.%) Fe2Y intermetallic particles and consolidated by hot isostatic pressing. The microstructure after the ...
