First implementation of transversely split proton beams in the CERN Proton Synchrotron for the fixed-target physics programme

A new extraction technique has been studied at the CERN Proton Synchrotron with a view of using it for the fixed-target physics programme at the Super Proton Synchrotron. The extraction scheme is based on advanced concepts of non-linear beam dynamics: prior to extraction a particle beam is split into several beamlets in a transverse plane by crossing a stable resonance, which allows extracting the beamlets over multiple turns. The principle of the extraction, the detail of its implementation, and the progress of the beam commissioning over the years are discussed here. More importantly, the results obtained during the first period of successful use for the physics programme are presented, focusing on the performance analysis of the novel extraction. Copyright CERN. Published by the EPLA under the terms of the Creative Commons Attribution 3.0 License (CC BY). Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.

Impact of high energy high intensity proton beams on targets: Case studies for Super Proton Synchrotron and Large Hadron Collider

Juan Blanco Sancho, Rudiger Schmidt

The Large Hadron Collider (LHC) is designed to collide two proton beams with unprecedented particle energy of 7 TeV. Each beam comprises 2808 bunches and the separation between two neighboring bunches is 25 ns. The energy stored in each beam is 362 MJ, sufficient to melt 500 kg copper. Safety of operation is very important when working with such powerful beams. An accidental release of even a very small fraction of the beam energy can result in severe damage to the equipment. The machine protection system is essential to handle all types of possible accidental hazards; however, it is important to know about possible consequences of failures. One of the critical failure scenarios is when the entire beam is lost at a single point. In this paper we present detailed numerical simulations of the full impact of one LHC beam on a cylindrical solid carbon target. First, the energy deposition by the protons is calculated with the FLUKA code and this energy deposition is used in the BIG2 code to study the corresponding thermodynamic and the hydrodynamic response of the target that leads to a reduction in the density. The modified density distribution is used in FLUKA to calculate new energy loss distribution and the two codes are thus run iteratively. A suitable iteration step is considered to be the time interval during which the target density along the axis decreases by 15%-20%. Our simulations suggest that the full LHC proton beam penetrates up to 25 m in solid carbon whereas the range of the shower from a single proton in solid carbon is just about 3 m (hydrodynamic tunneling effect). It is planned to perform experiments at the experimental facility HiRadMat (High Radiation Materials) at CERN using the proton beam from the Super Proton Synchrotron (SPS), to compare experimental results with the theoretical predictions. Therefore simulations of the response of a solid copper cylindrical target hit by the SPS beam were performed. The particle energy in the SPS beam is 440 GeV while it has the same bunch structure as the LHC beam, except that it has only up to 288 bunches. Beam focal spot sizes of sigma = 0.1, 0.2, and 0.5 mm have been considered. The phenomenon of significant hydrodynamic tunneling due to the hydrodynamic effects is also expected for the experiments.

2012

Electron Spin Resonance Magnetometers for Particle Accelerators

Anthony Jean Beaumont

CERN is the European Organization for Nuclear Research located in Geneva, Switzerland. Its main goal is to explore fundamental physics and it exists primarily to provide physicists the necessary tools for doing this, namely accelerators. These tools bring particles to almost the speed of light and then use them in different experiments. The CERN Accelerator Complex includes a chain of interconnected accelerators allowing the acceleration of charged particles up to 6.5 TeV per beam (for protons) in 2018 by the Large Hadron Collider (LHC). Different types of accelerator exist, but at CERN the most common are the synchrotrons. For those, the magnetic field is synchronous with the beam momentum. Magnetic models cannot be always used to predict the field within the required reproducibility, which may be as low as 10^(-5), due to non-linear effects (eddy currents, saturation and hysteresis). Therefore, most of the CERN's synchrotrons are equipped with a real time magnetic field measurement system, the so called "B-Train". The magnetic field measurement devices are composed of absolute field sensors (called "markers"), field tracking sensors (called "induction coils"), an acquisition system, a control system that calculates the magnetic field from the sensors, and a distribution system that delivers the field value to the users. Due to the configuration of the CERN accelerator chain, if one of the injectors fails, the LHC cannot have beam. Consequently, a huge consolidation program of the real time magnetic measurement systems was launched to guarantee operation in the long term. Thus the markers are critical devices for operations at CERN and must be carefully developed to fulfil the high performance and reliability requirements of the B-Train systems. This thesis propose new designs for electron spin resonance (ESR) field markers. We discuss in details the design, the operation, and performance of the ESR sensors based on resonator and oscillator structures including comparison between paramagnetic and ferrimagnetic samples. We propose four field marker levels at 36 mT, 106 mT, 360 mT and 710 mT that correspond to resonance frequencies of 1GHz, 3GHz, 10GHz and 20 GHz. Those measurement values cover most of the marker level requirements of the CERN accelerators and achieving resolution up to 0.1 nT/Hz^(1/2) for field ramps as fast as 5 T/s and field gradients as strong as 12 T/m. We conclude with measurements validation performed on the Proton Synchrotron (PS) and on the Low Energy Ion Ring (LEIR) accelerators.

EPFL2020

Electron Spin Resonance Magnetometers for Particle Accelerators

Anthony Jean Beaumont

EPFL2020

Impact of high energy high intensity proton beams on targets: Case studies for Super Proton Synchrotron and Large Hadron Collider

Juan Blanco Sancho, Rudiger Schmidt

2012