Microfluidic co-culture platform to quantify chemotaxis of primary stem cells

Zuzana Tatárová
Royal Soc Chemistry, 2016
Article

Résumé

Functional analysis of primary tissue-specific stem cells is hampered by their rarity. Here we describe a greatly miniaturized microfluidic device for the multiplexed, quantitative analysis of the chemotactic properties of primary, bone marrow-derived mesenchymal stem cells ( MSC). The device was integrated within a fully customized platform that both increased the viability of stem cells ex vivo and simplified manipulation during multidimensional acquisition. Since primary stem cells can be isolated only in limited number, we optimized the design for efficient cell trapping from low volume and low concentration cell suspensions. Using nanoliter volumes and automated microfluidic controls for pulsed medium supply, our platform is able to create stable gradients of chemoattractant secreted from mammalian producer cells within the device, as was visualized by a secreted NeonGreen fluorescent reporter. The design was functionally validated by a CXCL/CXCR ligand/receptor combination resulting in preferential migration of primary, non-passaged MSC. Stable gradient formation prolonged assay duration and resulted in enhanced response rates for slowly migrating stem cells. Time-lapse video microscopy facilitated determining a number of migratory properties based on single cell analysis. Jackknife-resampling revealed that our assay requires only 120 cells to obtain statistically significant results, enabling new approaches in the research on rare primary stem cells. Compartmentalization of the device not only facilitated such quantitative measurements but will also permit future, high-throughput functional screens.

Official source

https://infoscience.epfl.ch/record/219928?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Zuzana Tatárová
Royal Soc Chemistry, 2016
Article

Résumé

Official source

https://infoscience.epfl.ch/record/219928?ln=fr

À propos de ce résultat

Concepts associés (10)

Concepts associés

Chargement

Publications associées (5)

Publications associées

Chargement

Functional analysis of primary tissue-specific stem cells is hampered by their rarity. Here I developed greatly miniaturized microfluidic devices for the multiplexed, quantitative analysis of the chemotactic properties of primary, bone marrow-derived mesenchymal stem cells (MSC). The devices were integrated within a fully customized platform that both increased the viability of stem cells ex vivo and simplified manipulation during multidimensional image acquisition. Since primary stem cells can be isolated only in limited number, I optimized the design for efficient cell trapping from low volume and low concentration cell suspensions. Using nanoliter cell culture volumes and automated microfluidic controls for pulsed medium supply, my platform is able to create stable gradients of chemoattractant secreted from mammalian producer cells within the device, as was visualized by a secreted NeonGreen fluorescent reporter. The design was functionally validated by preferential movement of MSC in serum gradients and by using a CXCL/CXCR ligand/receptor combination in a co-culture design. Stable gradient formation prolonged assay duration and resulted in enhanced response rates for slowly migrating stem cells. Time-lapse video microscopy facilitated determining a number of migratory properties based on single cell analysis. Jackknife-resampling revealed that our assay requires only 120 cells to obtain statistically significant results, enabling new approaches in the research on rare primary stem cells. Compartmentalization of the device not only facilitated such quantitative measurements but will also permit future, high-throughput functional screens.

EPFL2016

Chargement

Biomolecular signaling is of utmost importance in governing many biological processes such as morphogenesis during tissue development where biomolecules regulate key cell-fate decisions. In vivo, these factors are presented in a spatiotemporally tightly controlled fashion and in the context of a soft and hydrated microenvironment. Although state-of-the-art microfluidic technologies allow precise biomolecule delivery in time and space, long-term (stem) cell culture at the micro- scale is far from ideal due to issues related to medium evaporation, limited space for cell growth, shear stress and a lack of cell-instructive microenvironments that might adversely impact cell-fate. As a result, microfluidic cell culture systems are not yet suitable to unravel complex multicellular phenomena. This may explain why they are not yet widely used in biology laboratories. Consequently, the overall goal of this thesis was to overcome this technology gap by developing next generation microfluidics through a combination of microfabrication and smart biomaterials. A special emphasis was placed on decoupling biomolecule presentation at micro-scale from macro-scale cell culture in order to enable long-term stem cell culture within user-friendly multiwell plate formats. First, a novel microfluidic concept was invented to rapidly immobilize linear protein gradients on the surface of poly(ethylene glycol) (PEG)-based hydrogels whose biophysical properties are reminiscent of natural extracellular matrices. This method allows efficient capture of steady-state gradients of tagged proteins (e.g. using Fc or biotin tags) in just a few minutes on engineered hydrogels that display the corresponding auxiliary proteins (e.g. ProteinA or NeutrAvidin). The selectivity and orthogonality of the chosen binding schemes enables the formation of parallel and orthogonal overlapping gradients of multiple proteins, which is impossible using existing platforms. After patterning, the microfluidic chip can be readily removed from the gel for cell culture applications. Using quantitative single-cell time-lapse microscopy, this platform was validated here by probing the effect of fibronectin concentration on the directionality and speed of cell migration. Next, the resolution, flexibility and throughput of the protein patterning on hydrogels was substantially enhanced by the introduction of hydrodynamic flow focusing, that is, the generation of user-defined patterns by spatially controlled step- wise deposition of biomolecules. To this end, a microfluidic device was conceived that enabled the generation of arrays of parallel and crossed overlapping gradients. Application of the platform to generate gradients of immobilized leukemia inhibitory factor (LIF) showed an influence of the LIF concentration on ESC self-renewal. This platform should be useful to systematically probe the effect of biomolecule dose, singly or in combinations, on stem cell behavior in vitro; however, it lacks the ability to dynamically vary the presentation of biomolecules that might be crucial to control stem cell fate towards establishing functional in vitro tissue models. To address this limitation, in the last part of the thesis work a hydrogel-based microfluidic chip was developed that decouples macro-scale cell culture on the gel surface from the precise spatiotemporal biomolecule delivery at the micro-scale, i.e. through the gel layer. The hydrogel chip, used here as a simple insert that is compatible with conventional multiwell plate formats, was optimized to support long- term ESC maintenance in both adherent format and as uniformly sized ESC aggregates termed embryoid bodies. The platform was successfully used for the spatially controlled neuronal commitment of ESC via delivery of gradients of the morphogen retinoic acid. Taken together, in this thesis several innovative microengineered cell culture platforms are presented which enable, perhaps for the first time, the long-term culture and manipulation of stem cell fate at the micro-scale. These systems should be useful to systematically probe in vitro the effect of biomolecule dose and delivery dynamics on stem cell behavior, ultimately facilitating the development of complex in vitro tissue models.

EPFL2012

Chargement

Bacterial cells behave as individuals despite being genetically identical and subject to the same environment. Although the underlying mechanisms of cellular individuality are not well understood, temporal variation of gene expression and protein levels in individual cells could act as sources for phenotypic heterogeneity of populations. Bacterial persistence in fluctuating environments relies on such diversity, allowing some individuals, by chance, to survive a challenge that would kill an unadapted and phenotypically homogeneous population. Bacterial persistence is a non-genetic, metastable phenomenon that is readily lost upon subculture of surviving cells in the absence of the environmental stress. A medically relevant example of persistence is the fractional killing of bacteria by antibiotics, whereby a subpopulation of cells survives indefinitely despite prolonged exposure to a bactericidal drug. It is hypothesized in the case of tuberculosis (TB) that drug therapy may require administration of multiple drugs for 6-9 months in order to eliminate a subpopulation of "persister" cells. The focus of this thesis is to understand how persisters tolerate antibiotics that kill their genetically identical siblings. To address this question, automated time-lapse fluorescence microcopy was applied in conjunction with microfluidic and microelectromechanical systems (MEMS) to study bacterial responses to antibiotics in real time at the single-cell level. A genetic approach was employed to identify mutants of Mycobacterium smegmatis with altered rates of persistence against the first-line anti-TB drug isoniazid (INH). A microfluidic platform was designed for high-throughput screening of transposon (Tn) mutant libraries. A pilot screen of 1,100 Tn mutants revealed 11 mutants that showed increased (persister-up, PU) or decreased (persister-down, PD) survival when exposed to isoniazid. These mutants were further characterized in comparison to wild-type cells using the single-cell microfluidics platform. This single-cell analysis revealed distinct modes of persistence within each category, which were otherwise masked at the population level. The results indicate that persistence behavior was the cumulative result of the dynamics of cell division and cell lysis. Mutants with decreased persistence exhibited behavior at single-cell level that challenges the accepted mechanism of isoniazid-mediated killing. Therefore, these results yield new insights into antibiotic persistence and isoniazid's mode of action. Persisters cannot be easily studied in non-fractionated populations of cells where they represent a small percentage of the total. As a complementary approach, a method was developed based on dielectrophoretic (DEP) purification of naturally occurred low frequency persister cells from an antibiotic-treated bacterial culture. Purification of persister cells would allow for downstream analysis using conventional bulk/population level transcriptomic and proteomic approaches. The crossover frequencies for live and dead cells were determined to enable selective trapping or release from the device. This approach enabled a proof-of-concept enrichment of live bacteria in the mixture of live and dead cells after INH treatment, based on their dielectric properties. Quantitative confirmation of the enriched/isolated cell populations was attempted using flow cytometry. The high-throughput microfluidic screening and single-cell approaches developed in this thesis could, in principal, be applied to the genetic analysis of a wide variety of dynamic cellular processes that can be imaged by time- lapse fluorescence microscopy, such as gene expression, cell division, chromosome replication and segregation, and protein localization. The biochemical analysis of live cells isolated by dielectrophoresis-based separation would provide useful information about the underlying persistence mechanism. Dielectrophoresis could also be a valuable analytical tool for mutant characterization based on their intrinsic dielectric properties, either at single-cell or population levels. In conclusion, this thesis presents several new microfabricated tools to identify and understand bacterial persistence. The thesis illustrates how integration of microfluidic tools with automated time-lapse microscopy allows hidden characteristics that are present but invisible in the macro- world of batch cultures to be examined in a quantitative and high-throughput manner in the micro-world of single-cell analysis.

EPFL2012

Chargement

EPFL2012