Publication

Two-Stage Heat Pump using Oil-Free Turbocompressors – System Design and Simulation

Publications associées (246)

Environomic multi-objective optimisation of a district heating network considering centralized and decentralized heat pumps

Daniel Favrat, Adam Molyneaux, Geoffrey Basil Leyland

Concern for the environment has been steadily growing in recent years, and it is becoming more common to include environmental impact and pollution costs in the design problem along with construction, investment and operating costs. To economically respond ...

2008

Integrated design, optimization and experimental investigation of a direct driven turbocompressor for domestic heat pumps

Jürg Alexander Schiffmann

Heating and cooling will more and more rely on heat pumping in order to enable a more rational use of energy. The further development of domestic and small industrial multi-stage heat pumps with enhanced performance is impaired by the presence of oil mixed ...

EPFL2008

Supercritical Reaction Calorimetry: Versatile Tool for Measuring Heat Transfer Properties and Monitoring Chemical Reactions in Supercritical Fluids

Thierry Meyer, Charalampos Mantelis

The heat flow reaction calorimetry technique was developed for reactions with supercrit. fluids and was applied to monitor the free-radical dispersion polymn. of Me methacrylate in supercrit. carbon dioxide (scCO2). The main math. equation for the calorime ...

2008

Thermochemical properties from ab initio calculations: pi- and sigma-free radicals of importance in soot formation: (C3H3)-C-center dot (propargyl), (C4H3)-C-center dot, (C13H9)-C-center dot (phenalenyl), (C6H5)-C-center dot (phenyl), (C10H7)-C-center dot (naphthyl), (C14H9)-C-center dot (anthryl), (C14H9)-C-center dot (phenanthryl), (C16H9)-C-center dot (pyrenyl), (C12H7)-C-center dot (acenaphthyl), and (C12H9)-C-center dot (biphenylyl)

Michel Rossi

The calculated difference in the standard heat of formation Delta Delta H-f degrees(298.15) of n- and i-C4H3 center dot free radicals is 37.9 kJ mol(-1) for G3MP2B3 and 45.0 kJ mol(-1) for CCSD(T)-CBS (W 1 U) calculations, which seems to preclude the direc ...

2008

A magnetic heat pump with porous magneto caloric material

Didier Albert Simon Vuarnoz, Marc Diebold

At present magnetic refrigeration shows a realistic potential to penetrate into some niche markets in the field of cold and hot "production". It is well known that a refrigerator for cooling and a heat pump for heating are machines based on the same princi ...

Wiley-Blackwell2007

Modeling of thermo-physical properties for FRP composites under elevated and high temperatures

Thomas Keller, Yu Bai, Till Vallée

A decomposition model for resin in glass fiber-reinforced polymer composites (GFRP) under elevated and high temperature was derived from chemical kinetics. Kinetic parameters were determined by four different methods using thermal gravimetric data at diffe ...

2007

Laser soldering of piezoelectric actuator with minimal thermal impact

Jacques Jacot, Thomas Maeder, Yannick Sébastien Fournier, Frank Seigneur

Mechanical and electrical connecting of piezoelectric actuator is often done using conductive glue. Its advantage is not to heat the piezoelectric actuator during connection. But there are many disadvantages to gluing; the main one is curing time. Welding ...

2007

Energy conversion processes for the use of geothermal heat - Final report

François Maréchal, Luc Girardin

The study deals with theoretical as well as with practical aspects of the conversion of geothermal heat to electricity. The report is divided into three parts: • Part I: General study • Part II: Practical experience: planning & operation of geothermal powe ...

2007

Divertor particle and power deposition profiles in JET ELMy H-mode discharges

Richard Pitts

The transient pulses of heat and particles arriving at the divertor target plates as a consequence of upstream ELM activity have been characterised at JET using an array of target embedded Langmuir probes in the MkIIGB-SRP divertor. High temporal and spati ...

2007

Method of manufacturing a module of photoelectrochemical cells with long-term stability

Described is a method of manufacturing a module with long-term stability even though it contains a non-heat-resistant material, in particular a photosensitizer. Two glass plates (1, 2) are connected to each other round their edges with an edge-sealing stru ...

2007

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search