Suspended micro-resonator fabrication: fusion bonding of Silicon Nitride interfaces
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
ABSTRACT The mechanical stability of silicon MEMS dies is strongly influenced by the microfabrication processes, especially grinding, dicing and etching, which leave characteristic damage (defects, cracks, dislocations...) in the substrate material. Specia ...
Platinum/tantalum/silicon ohmic contacts were designed, fabricated and characterized to withstand high-temperature post-processing: the ohmic behavior was maintained after 1 h annealing, at temperatures up to 850 degrees C in an oxidizing environment. A LP ...
Hermiticity is an essential requirement of a MEMS package for a device to work properly. Hermeticity also must be preserved during the operations following packaging, during which the package bond should not remelt. Bonding temperature is limited however t ...
High pressure-rated channels allow microfluidic assays to be performed on a smaller footprint while keeping the throughput, thanks to the higher enabled flow rates, opening perspectives for cost-effective integration of CMOS chips to microfluidics circuits ...
Three Dimensional (3D) integration, based on through silicon vias (TSV), has the potential to become a key enabling technology for many applications. TSVs are commonly categorized according to their aspect ratio and diameter. An equally important parameter ...
In the framework of the NanoTera project CabTuRes, a system-in-package for a nano-resonator was proposed, integrating CMOS driving electronics and vacuum encapsulation. This doctoral research aimed to investigate 3D-integration technologies for a Single-Wa ...
This study adds a new dimension to lab-on-a-chip systems by employing three-dimensional (3D) integration technology for improved performance, higher functionality, and on-chip computational power. Despite the extensive amount of current research on 3D memo ...
We present a novel technique for heterogeneous integration using gold filled Through Silicon Vias (TSV) and thermocompression bond bumps formed in a single fabrication step, using gold nanoparticles dispensed by inkjet printing. Gold-filled TSV arrays (12 ...
Resonators for time and frequency reference applications are essential elements found in most electronic devices surrounding us. The continuous minimization and ubiquitous distribution of such electronic devices and circuits demands for resonators of small ...
We present a low-temperature indium hermetic bonding technique on wafer level without using flux, active atmosphere or other pretreatment of the indium. Its simplicity and low temperatures allow encapsulation of sensitive MEMS devices. Bonding stronger tha ...
