Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites

Emission characteristics of metal halide perovskites play a key role in the current widespread investigations into their potential uses in optoelectronics and photonics. However, a fundamental understanding of the molecular origin of the unusual blueshift of the bandgap and dual emission in perovskites is still lacking. In this direction, we investigated the extraordinary photoluminescence behavior of three representatives of this important class of photonic materials, that is, CH3NH3PbI3, CH3NH3PbBr3, and CH(NH2)(2)PbBr3, which emerged from our thorough studies of the effects of temperature on their bandgap and emission decay dynamics using time-integrated and time-resolved photoluminescence spectroscopy. The low-temperature (

Understanding the Interfaces between Triple-Cation Perovskite and Electron or Hole Transporting Material

Jessica Taylor Flach, Ulf Anders Hagfeldt

The properties of efficient solar cells fabricated with triple-cation perovskite placed between a mesoporous titania layer and a spiro-OMeTAD layer are studied by using devices either prepared under water-free drybox conditions or fabricated under ambient room humidity. The morphological studies indicate that the content of unreacted PbI2 phase in the perovskite structure is much higher near the interface with titania than near the interface with spiro-OMeTAD. The stationary emission spectra and transient bleach peaks of perovskites show additional long-wavelength features close to the titania side. Time-resolved techniques ranging from femtoseconds to seconds reveal further differences in charge dynamics at both interfaces. The population decay is significantly faster at the titania side than at the spiro-OMeTAD side for the cells prepared under ambient conditions. An increased hole injection rate correlates with higher photocurrent seen in the devices prepared under drybox conditions. The charge recombination loss on the millisecond time scale is found to be slower at the interface with titania than at the interface with spiro-OMeTAD. The ideality factor of the cells is found to increase with increasing DMSO content in the precursor solution, indicating a change in recombination mechanism from bulk to surface recombination. We also found that the charge dynamics are not uniform within the whole perovskite layer. This feature has significant implications for understanding the operation and optimizing the performance of solar devices based on mixed cation perovskites.

AMER CHEMICAL SOC2020

Fluorination of Organic Spacer Impacts on the Structural and Optical Response of 2D Perovskites

Pietro Caprioglio, Inés Garcia Benito, Giulia Grancini, Mohammad Khaja Nazeeruddin, Valentin Ianis Emmanuel Queloz

Low-dimensional hybrid perovskites have triggered significant research interest due to their intrinsically tunable optoelectronic properties and technologically relevant material stability. In particular, the role of the organic spacer on the inherent structural and optical features in two-dimensional (2D) perovskites is paramount for material optimization. To obtain a deeper understanding of the relationship between spacers and the corresponding 2D perovskite film properties, we explore the influence of the partial substitution of hydrogen atoms by fluorine in an alkylammonium organic cation, resulting in (Lc)(2)PbI4 and (Lf)(2)PbI4 2D perovskites, respectively. Consequently, optical analysis reveals a clear 0.2 eV blue-shift in the excitonic position at room temperature. This result can be mainly attributed to a band gap opening, with negligible effects on the exciton binding energy. According to Density Functional Theory (DFT) calculations, the band gap increases due to a larger distortion of the structure that decreases the atomic overlap of the wavefunctions and correspondingly bandwidth of the valence and conduction bands. In addition, fluorination impacts the structural rigidity of the 2D perovskite, resulting in a stable structure at room temperature and the absence of phase transitions at a low temperature, in contrast to the widely reported polymorphism in some non-fluorinated materials that exhibit such a phase transition. This indicates that a small perturbation in the material structure can strongly influence the overall structural stability and related phase transition of 2D perovskites, making them more robust to any phase change. This work provides key information on how the fluorine content in organic spacer influence the structural distortion of 2D perovskites and their optical properties which possess remarkable importance for future optoelectronic applications, for instance in the field of light-emitting devices or sensors.

2020

Goldschmidt's Rules and Strontium Replacement in Lead Halogen Perovskite Solar Cells: Theory and Preliminary Experiments on CH3NH3SrI3

Ulf Anders Hagfeldt, Tor Jesper Jacobsson

During the past few years, organic lead halogen perovskites have emerged as a class of highly promising solar cell materials, with certified solar cell efficiencies now surpassing 20%. Concerns have, however, been raised about the possible environmental and legalization problems associated with a new solar cell technology based on a water-soluble lead compound. Replacing lead in the perovskite structure: with a less toxic element, without degrading the favorable photo physical properties, would therefore be of interest. In this paper, the possibility of replacing lead with other metal ions is explored by following the replacement rules of Goldschmidt together with additional quantum mechanical considerations. This analysis provides a conceptual toolbox toward replacing lead, as well as additional insights into the photo physics of the metal halogen perovskites. This approach is exemplified by focusing on strontium in particular, which is nontoxic and relatively inexpensive. The ionic radius of Sr2+ and Pb2+ are almost identical, suggesting an exchange could be made without affecting the crystal structure. Couple cluster calculations on the metal ions and their halogen salts give the bonding patterns to be sufficiently similar and density functional theory (DFT) revealed the strontium perovskite, CH3NH3SrI3, to be a stable phase, despite the difference in electronegativity between lead and strontium. This is further supported by the existence of binary PM, and SrI2 compounds and the beneficial formation energy of the strontium perovskite. The electronic properties of both CH3NH3SrI3 and CH3NH3PbI3 were simulated and compared, revealing a higher degree of ionic interaction in the metal halogen bound in the strontium perovskite. This is a consequence of the lower electronegativity of strontium, which, together with the lack of d-orbitals in the Valence of Sr2+, results, in a higher band gap. The band gap for the strontium perovskite was estimated to 3.6 eV, which unfortunately is too high for an efficient photo absorber. Initial investigations on experimental synthesis of the strontium perovskite, using wet chemical methods, revealed it to be harder to produce than the lead perovskite This is explained as a:consequence of different bonding patterns in the metal iodine salts, which obstruct the methylammonium intercalation pathway utilized for forming the perovskite. Vapor phase methods are instead suggested as more promising synthesis routes.