Experimental Investigation of Steel Braces Installed with Intentional Eccentricity Using Gusset Plate Connections
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In North America, a common design practice for steel frame buildings with perimeter steel special moment frames (SMFs) is to employ deep and slender wide-flange steel columns (i.e., range of column depth, d > 16 inches). Till recently, very little was know ...
The seismic design provisions and stability requirements for steel columns used at the first storey of MRFs as specified is Canadian steel design standard (CSA S16), U.S. design provisions for steel buildings (AISC 341 and AISC 360), the New Zealand steel ...
Extended shear tab connections (either in full-depth or partial-depth configurations) have been widely used to connect simply supported beams to the web of supporting girders. Full-scale laboratory tests of extended beam-to-girder shear tab connections dem ...
This paper investigates the cyclic behavior of deep wide-flange sections, used as columns in steel Special Moment Frames (SMFs), through detailed finite element (FE) analysis. A wide range of wide-flange sections is subjected to symmetric cyclic lateral lo ...
This paper assesses the composite beam effects on the hysteretic behavior of fully-restrained beam-to-column connections as part of steel moment-resisting frames (MRFs) designed in highly seismic regions. A practical approach is developed based on availabl ...
American Institute of Steel Construction (AISC)2016
Large-scale shake table tests were conducted at E-Defense, Japan, to examine the dynamic response of a steel concentrically braced frame. The specimen was a single-bay, single-story frame with a pair of square hollow structural section braces placed in a c ...
Reliable collapse assessment of structural systems under earthquake loading requires analytical models that are able to capture component deterioration in strength and stiffness. For calibration and validation of these models, a large set of experimental d ...
Lateral torsional buckling (LTB), a complex phenomenon of instability, occurs when a beam is solicited by a bending force. In the area of steel and composite bridges girders which are characterised by slender plate girders, few experimental and theoretical ...
ECCS European Convention for Constructional Steelwork2014
The work and findings reported in the paper are interesting to the discussers and will advance the understanding of the shear-failure mechanism of reinforced concrete (RC) beams. Some details need further discussion and clarification. In many cases, shear ...
The CLIC damping rings are designed to produce unprecedentedly low-emittances of 500 nm and 5 nm normalized at 2.86 GeV, in all beam dimensions with high bunch charge, necessary for the performance of the collider. The large beam brightness triggers a numb ...