MnO nanoparticles as the cause of ferromagnetism in bulk dilute Mn-doped ZnO

We show that the observed ferromagnetic behavior of ZnO lightly doped with Mn coincides with the presence of MnO nanoparticles, whereas cluster-free Mn doped ZnO behaves paramagnetically. This conclusion is reached by a study of the structural and magnetic properties of powdered samples of (Mn-x, Zn1-x) O with x

Thermopower as a Unique Tool to Probe Quantum Phase Transitions

Stevan Arsenijevic

In my thesis, transport measurements such as resistivity and, more importantly, thermopower S, were used to explore the phase diagram of bad metals. Bad metals are electronically correlated systems whose ground state lies close to a quantum phase transition. By tuning the control parameters, such as temperature (T ), magnetic field (B), hydrostatic pressure (p) or chemical substitution (x), we can induce phase transitions between the various electronic, magnetic and structural phases. Here, the thermopower is presented as a unique tool for probing quantum phase transition because it is a measure of the entropy of conducting electrons. The main part of the thesis is dedicated to the study of Fe-based superconductors (FeSC) discovered in 2008. Their parent compound has an antiferromagnetic (AF) ground state, where the itinerant electrons form a spin-density wave (SDW), a periodic modulation of spin density. This coincides or is preceded by a structural, tetragonal-to-orthorhombic transition. The nesting between the electron and hole Fermi surface is believed to be the driving mechanism for the SDW state. By changing the structural or chemical properties the AF ground state of FeSC is suppressed, giving way to superconductivity (SC). The remaining antiferromagnetic fluctuations above the transition can provide a glue for SC pairing. Here, the analysis of the thermopower S/T of BaFe1−xCoxAs2 (BFCA) in the x-T phase diagram shows the signatures of the spin fluctuation which have a dome-like dependence and follow the trend of superconducting Tc . The logarithmic increase of S/T upon decreasing T is ascribed to the proximity of the spin-density-wave quantum critical point. It can be understood as an increase of entropy due to the incommensurate AF spin fluctuations. We can ascribe the high values of thermopower in BFCA at intermediate- and room-temperatures to the influence of low-T quantum criticality. To probe the response of the electronic system in FeSC to structural changes, we performed measurements under pressure of the parent compound BaFe2As2 (BFA), the SC electron-doped BFCA, and hole-doped Ba1−xKxFe2As2 (BKFA). In the parent compound pressure suppresses the structural/SDW transition, similar to the effect of doping. For doped systems, in order to describe the behavior of thermopower in the high-T range (above 100K) we used a semi-metallic two-band model which was fitted to the data in order to extract the pressure dependence of the band parameters. In both doping cases the effect of pressure was similar, an increase of the band overlap and of the effective number of charge carriers. With this model we can explain the high-T , x and p dependence of thermopower in both electron- and hole-doped BFA. In a structurally simpler Fe-chalcogenide Fe1+yTe1−xSex compound, the excess of Fe has a Kondo-like influence on the charge carriers which dramatically changes the physics of the normal state. To probe the normal state, pressure, doping, magnetic Fe-excess concentration (y) and temperature were used as control parameters. At low-T a characteristic upturn of resistivity (ρmag ) is observed, followed by an increase of thermopower (Smag ), which we identify as the magnetic contribution caused by the spin-flip scattering events. Increasing the y resulted in an increase of ρmag , and a decrease of Smag , which is in agreement with the behavior of canonical Kondo-systems. Pressure suppresses the magnetic contribution to transport, thus increasing the itinerancy of the system. MnSi is another system in which the sensitivity of thermopower to entropy brings new information related to the complex magnetic structure. Pressure was used to drive the system from a helically ordered, canonical Fermi-liquid (FL) phase with T 2-resistivity to the intrinsically disordered, non-Fermi-liquid (NFL) phase above pc with T3/2-dependence. Our contour plot of S/T demonstrated how powerful the thermopower technique is, by reproducing the whole previously established T -p phase diagram. At the phase transition from the magnetically-ordered FL phase to the disordered NFL, the thermopower is dramatically enhanced. We bring useful information about the mysterious partial order (PO) phase inside the NFL phase, previously detected only by neutron scattering. The fluctuating helices scenario can describe the observed increase of entropy/thermopower in the PO phase. At ambient pressure, close to the helical transition of MnSi, a moderate magnetic field can stabilize the skyrmion lattice - the lattice of topological magnetic whirls, vortices. We observe a signature of the skyrmion lattice as a minute drop in thermopower. It is located exactly in the same region of the T − B phase diagram where an increase in magnetoresistance and Hall effect was reported previously. This feature originates from the additional scattering of conducting electrons on magnetic vortices, while the change in S is dominated by the decrease of entropy as the stable skyrmion lattice is formed. Overall, resistivity was used to confirm the established phase diagram, while thermopower, as an interesting and not sufficiently understood technique, was used to probe the sensitive changes of the charge carriers at the Fermi surface. We explored various phases showing how useful thermopower is to probe the entropy of electronic system on the verge of quantum phase transition.

EPFL2012

Synthesis, crystal growth and physical properties of the frustrated spin ladder material BiCu2PO6

Shuang Wang

In recent years quantum antiferromagnets with an intrinsically disordered (“spin liquid”) ground state and an energy gap in the spin excitation spectrum have received a great deal of attention. In search for new experimental realizations of spin-ladder and related models, we have embarked upon a new interesting family of low-dimensional materials with the general formula BiCu2AO6 (A = P, V and As). Among them, BiCu2PO6 shows a structure where Cu spins appear to form a two-leg zigzag ladder, which is believed to be a valuable model of a quantum magnet. However, for detailed studies of quantum magnetism, single crystals are indispensible. Therefore, in this thesis, synthesis and characterization of the newly-discovered spin ladder material BiCu2PO6 (BCPO) and its derivatives in the form of powder and single crystal are presented. Polycrystalline samples of Bi(Cu1-xZnx)2PO6 (x= 0.01, 0.02, 0.03, 0.04, 0.05 and 1), Bi1-y(Ca, Sr, La )yCu2PO6 (y = 0.15, 0.5 and 1) and BiCu2(P1-zVz)O6 (z = 1) were synthesized in this work. The solid state synthesis reactions, phase purity and thermal properties of the samples, substitution solubility, and preliminary magnetic susceptibility have been studied by thermal analysis (TG-DTA), X-ray powder diffraction (XRD), and Scanning Electron Microscope (SEM) as well as DC magnetization measurements, respectively. The BiCu2PO6 structure shows a remarkable chemical flexibility and interesting substitution effects. For detailed studies of the magnetic properties, well characterized large single crystals are indispensable. Thus in this thesis, a number of single crystal growth experiments have been performed using the Travelling Solvent Floating Zone method (TSFZ). Under the elaborated crystal growth conditions (growth rate of ~1 mm/h, gas mixture of 20% O2 in Argon, total 3 pressure (6~6.5 bar), high quality cm -size single crystals of Bi(Cu1-xZnx)2PO6 (x = 0, 0.01, 0.03, 0.05) have been successfully grown for the first time. For these crystals phase purity, crystal morphology/orientation, defect density, chemical composition distribution, crystal structure (room temperature and 1.5 K) and single crystal quality were thoroughly studied based on X-ray and neutron powder diffraction, optical and scanning electron microscopy, X-ray/neutron Laue diffraction, ICP-OES/X-ray fluorescence and two-axis neutron diffraction. Moreover, the specific heat Cp (H,T), AC susceptibility χ(H,T) and DC magnetization M(H,T) measurements on well-characterized single crystal samples of the undoped BCPO and 5% Zn-doped BCPO with the field applied along main crystallographic axes were performed in order to study the unique low temperature magnetic behaviour exhibited in this system, such as anisotropy of the magnetic properties, impurity-induced magnetism by the substitution of non-2+ magnetic cations (e.g. Zn ) and frustration. The magnetic phase diagram (H-T) under low field has been constructed. Further results obtained by close collaborators, based on the measurements made on single crystal samples grown in this thesis, including field-induced quantum phase transitions, NMR, Raman studies are attached directly at the end of this thesis.

EPFL2013

J1−J2 square-lattice Heisenberg antiferromagnets with 4d1 spins: AMoOPO4Cl (A=K,Rb)

Peter Babkevich, Henrik Moodysson Rønnow

Magnetic properties of AMoOPO4Cl (A=K,Rb) with Mo5+ ions in the 4d1 electronic configuration are investigated by magnetization, heat capacity, and nuclear magnetic resonance (NMR) measurements on single crystals, combined with powder neutron diffraction experiments. The magnetization measurements reveal that they are good model compounds for the spin-1/2 J1−J2 square-lattice magnet with the first and second nearest-neighbor interactions. Magnetic transitions are observed at around 6 and 8 K in the K and Rb compounds, respectively. In contrast to the normal Néel-type antiferromagnetic order, the NMR and neutron diffraction experiments find a columnar antiferromagnetic order for each compound, which is stabilized by a dominant antiferromagnetic J2. Both compounds realize the unusual case of two interpenetrating J2 square lattices weakly coupled to each other by J1.