Strength and fracture of silicon second-phase particles in aluminium casting alloys
Publications associées (196)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Crack onset strain measurements of a confined layer in tension provide the means for layer toughness estimation. The procedure can be simplified if steady-state conditions prevail starting from the commencement of crack propagation, an assumption frequentl ...
Copper and its alloys generally display a severe reduction in ductility between roughly 300 and 600 degrees C, a phenomenon variously called 'intermediate temperature embrittlement' or 'ductility trough behaviour'. This review of the phenomenon begins by p ...
The anisotropy of the solid-liquid interfacial energy, gamma(sl), plays a key role in the accurate prediction of growth morphologies in metallic alloys. This interfacial energy anisotropy can vary duo to alloy composition, especially when that of the pure ...
Minerals, Metals & Materials Soc, 184 Thorn Hill Rd, Warrendale, Pa 15086-7514 Usa2009
A fairly simple experimental setup has been designed for testing the resistance of the mushy zone of alloys during solidification under tensile conditions. It has been used to study the effect of coalescence among the solid grains at a late stage of solidi ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
The monotonic and cyclic crack growth rate of cracks is strongly influenced by the microstructure. Here, the growth of cracks emanating from pre-cracked micron-scale elastic particles and growing into single crystals is investigated, with a focus on the ef ...
Monodispersed Pd nanoparticles (8, 11, and 13 nm in iameter) as confirmed by high resolution transmission electron microscopy were prepared via the reverse microemulsion method and deposited on structured supports consisting of carbon nanofibers (CNF) grow ...
The threshold pressure P-0 for infiltration of Al-12 wt.% Si alloy into compacts of mixtures of alumina and silicon carbide particles having largely different size is investigated. The results are in line with those recently derived from infiltrations of A ...
The thermal conductivity of aluminum matrix composites having a high volume fraction of SiC particles is investigated by comparing data for composites fabricated by infiltrating liquid aluminum into preforms made either from a single particle size, or by m ...
The mechanical response of the reinforced active alloy Incusil (TM) ABA (R)-SiC is studied. Specimens with up to 27 vol.% SiC particles are produced and tested in tension. The presence of the reinforcement leads to modifications in the alloy mechanical res ...