Thermal Activation, Intermittency and Size Effects in the Plastic Deformation of Cast Aluminium Microwires
Publications associées (209)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
An inverse method for automatic identification of the parameters involved in a polycrystalline viscoplastic selfconsistent (VPSC) model is presented. The parameters of the constitutive viscoplastic law at the single-crystal level, i.e. the critical resolve ...
Polycrystalline pure Fe and Fe-12Cr alloy have been proton-irradiated to doses of 10(-3)-3 x 10(-1) dpa at room temperature and 523 K. Samples were mechanically tested in tension and transmission electron microscopy (TEM) was performed on the as-irradiated ...
The irradiation of metals by energetic particles causes significant degradation of the mechanical properties(1,2), most notably an increased yield stress and decreased ductility, often accompanied by plastic flow localization. Such effects limit the lifeti ...
Irradiated 304 and 316 stainless steel samples were investigated. The steels were neutron irradiated to 1.5 and 7.5 dpa at 550 K. Similar types of steels were irradiated at 550 K with 590 MeV protons in the PIREX facility at PSI, Switzerland. The doses rea ...
In situ cathodoluminescence experiments have been performed to follow the time dependence of the UV luminescence in epitaxial lateral overgrowth GaN specimens. The decrease of the observed intensity and red-shift of the UV peak are interpreted in terms of ...
A new criterion for the appearance of hot tears in metallic alloys is proposed. Based upon a mass balance performed over the liquid and solid phases, it accounts for the tensile deformation of the solid skeleton perpendicular to the growing dendrites and f ...
The influence of drawing tension on the formation of Bragg gratings in B-Ge- and Sn-Ge-codoped core fibers is investigated by transmission and stress measurements. With increasing drawing tension, the axial stress is reduced in the B-Ge-codoped core but in ...
Transient creep experiments have been performed on poly-quasicrystalline specimens of the icosahedral Al-Cu-Fe phase. Three temperatures (870, 960 and 1000 K) have been selected in the ductile regime for creep stresses that range between 30 and 320 MPa. In ...
Hot tear is one of the most serious defect which a casting can suffer. It represents a major limitation to the production of foundry cast parts and to the productivity of continuous casting processes such as the direct chiil casting of aluminium alloys. As ...
Synchrotron x-ray imaging and stress measurements of diamond-anvil cell gaskets revealed large elastic strains at the diamond tip at a pressure of 300 gigapascals. The diamond, generally considered a rigid body, bent 16 degrees over a distance of 300 micro ...