Control of Bio-Inspired Sprawling Posture Quadruped Robots with an Actuated Spine

Sprawling posture robots are characterized by upper limb segments protruding horizontally from the body, resulting in lower body height and wider support on the ground. Combined with an actuated segmented spine and tail, such morphology resembles that of salamanders or crocodiles. Although bio-inspired salamander-like robots with simple rotational limbs have been created, not much research has been done on kinematically redundant bio-mimetic robots that can closely replicate kinematics of sprawling animal gaits. Being bio-mimetic could allow a robot to have some of the locomotion skills observed in those animals, expanding its potential applications in challenging scenarios. At the same time, the robot could be used to answer questions about the animal's locomotion. This thesis is focused on developing locomotion controllers for such robots. Due to their high number of degrees of freedom (DoF), the control is based on solving the limb and spine inverse kinematics to properly coordinate different body parts. It is demonstrated how active use of a spine improves the robot's walking and turning performance. Further performance improvement across a variety of gaits is achieved by using model predictive control (MPC) methods to dictate the motion of the robot's center of mass (CoM). The locomotion controller is reused on an another robot (OroBOT) with similar morphology, designed to mimic the kinematics of a fossil belonging to Orobates, an extinct early tetrapod. Being capable of generating different gaits and quantitatively measuring their characteristics, OroBOT was used to find the most probable way the animal moved. This is useful because understanding locomotion of extinct vertebrates helps to conceptualize major transitions in their evolution. To tackle field applications, e.g. in disaster response missions, a new generation of field-oriented sprawling posture robots was built. The robustness of their initial crocodile-inspired design was tested in the animal's natural habitat (Uganda, Africa) and subsequently enhanced with additional sensors, cameras and computer. The improvements to the software framework involved a smartphone user interface visualizing the robot's state and camera feed to improve the ease of use for the operator. Using force sensors, the locomotion controller is expanded with a set of reflex control modules. It is demonstrated how these modules improve the robot's performance on rough and unstructured terrain. The robot's design and its low profile allow it to traverse low passages. To also tackle narrow passages like pipes, an unconventional crawling gait is explored. While using it, the robot lies on the ground and pushes against the pipe walls to move the body. To achieve such a task, several new control and estimation modules were developed. By exploring these problems, this thesis illustrates fruitful interactions that can take place between robotics, biology and paleontology.

Legged locomotion with spinal undulations

Konstantinos Karakasiliotis

Legged locomotion with spinal undulations is a topic that has not received much attention yet in robotics, though, vertebrates depend on both their limbs and spine to move efficiently in their environments. In this thesis, my aim is to get more insights into the role and function of these two body parts as well as their coordination. Biology provides several answers to these questions. Salamanders and lizards are great biological paradigms for studying animal locomotion with limbs and flexible spine. Not only do they have a highly flexible spine and limbs that can sometimes vary in strength or even number, but they also demonstrate a rich repertoire of locomotor modes. They can walk on land, while they can swim and walk in water. This provides many more examples on the ways that limbs and spine function and coordinate. Biorobotics is a growing field of robotics that aims at answering questions that cannot be answered from animal observations. Those questions often deal with the development of a specific function of a body part. In my studies, I initially used a bio-inspired amphibious salamander-like robot Salamandra robotica II to extract basic principles of salamander locomotion. Although the improvements of the limb and tail designs enhanced the robot’s performance to a level that was surprisingly close to the salamander’s, several limitations were identified owing to the simplicity of the bio-inspired design. These limitations motivated me to design a new amphibious salamander-like robot, Pleurobot, which is capable of replicating the movements of salamanders with reasonable accuracy. A novel methodology was also used during this process which proved to be effective but simple at the same time. Three-dimensional kinematics of the salamander’s skeleton were recorded and used to guide the design process and optimization of the robot’s morphology and joints’ topology. The raw angular kinematics, extracted from X-ray biplanar videos of salamanders, were then used to drive the joints of Pleurobot, resulting in natural-looking and effective locomotion. The main contributions of this thesis are two-fold: i) biological data and robotic prototypes that improve our understanding on sprawling locomotion and ii) a successful methodology for robotic design for more animal-like robots and agile control

EPFL2013

Online optimization of swimming and crawling in an amphibious snake robot

Alessandro Crespi, Auke Ijspeert

An important problem in the control of locomotion of robots with multiple degrees of freedom (e.g., biomimetic robots) is to adapt the locomotor patterns to the properties of the environment. This article addresses this problem for the locomotion of an amphibious snake robot, and aims at identifying fast swimming and crawling gaits for a variety of environments. Our approach uses a locomotion controller based on the biological concept of central pattern generators (CPGs) together with a gradient-free optimization method, Powell’s method. A key aspect of our approach is that the gaits are optimized online, i.e., while moving, rather than as an off-line optimization process. We present various experiments with the real robot and in simulation: swimming, crawling on horizontal ground, and crawling on slopes. For each of these different situations, the optimized gaits are compared with the results of systematic explorations of the parameter space. The main outcomes of the experiments are: 1) optimal gaits are significantly different from one medium to the other; 2) the optimums are usually peaked, i.e., speed rapidly becomes suboptimal when the parameters are moved away from the optimal values; 3) our approach finds optimal gaits in much fewer iterations than the systematic search; and 4) the CPG has no problem dealing with the abrupt parameter changes during the optimization process. The relevance for robotic locomotion control is discussed.

2008

Roombots: Design and Implementation of a Modular Robot for Reconfiguration and Locomotion

Alexander Spröwitz

In this thesis we present the design and implementation of a novel self-reconfiguring modular (SR-MR) robotic system: Roombots. We are aiming at three main applications with Roombots; locomotion through self-reconfiguration in the regular cubic 3D-lattice on structured surfaces, locomotion in non-structured environments applying central pattern generators (CPG) as the locomotion controller, and self-assembly and reconfiguration of static objects of the day-to-day environment, such as furniture. Robot assemblies from self-reconfigurable modular robots have the ability to adapt to a given task and working environment by altering their shape through a series of reconfiguration moves, and attachments and detachments between the modules. We are interested in self-reconfiguring modular robots for their shape-changing capabilities, and their distributed characteristics. We envision the following applications for Roombots: First, self-reconfiguration in a structured 3D lattice, i.e. a floor and walls equipped with connectors. Embedded connectors can provide pivot points for locomotion of SR-MR assemblies, and docking and recharging places for our adaptive furniture pieces. Second, our proposed concept for locomotion control of modular robots on non-structured ground are central pattern generators. Third, we would like to build adaptive and versatile furniture from modular robots and light-weight elements. In the following we are able to count more than 60 modular robotic systems, developed over the last two decades. However we were unable to identify an existing system which could provide us with all desired kinematic and geometric capabilities. This led us to design and implement a novel self-reconfiguring modular robotic system: Roombots. To tackle the module design we attempt to identify both meaningful design parameters from existing modular robots, and essential features for our applications. The combination of both leads to the kinematic and geometric description of the Roombots modules, and eventually to its implementation. In order to be able to assemble furniture from our Roombots units in the future, we need a reconfiguration framework which supports the specific requirements of Roombots. Metamodules made of two units attached in-series are attracted and guided by a virtual force-field, they use broadcast signals, look-up tables of collision clouds and simple assumptions about their near environment to reach their seeding positions, which are currently hand coded. For the task of locomotion in non-structured environments we propose a framework for learning to move with modular robots using central pattern generators and online optimization. The distributed implementation of CPGs offers an ideal substrate for producing locomotion patterns and for online learning, and an optimization framework for fast learning.