FRP-to-concrete debonding - global and local bond behaviour
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The bond properties between concrete and steel reinforcement influence structural stiffness and deformation behavior as a result of tension stiffening. In specific cases, the load-bearing capacity of engineering structures depends on the deformation behavi ...
The automatic generation of elastic-plastic stress fields (EPSF) for structural concrete members by means of the finite element method has been demonstrated as a suitable approach for the design and assessment of D regions. This methodology allows accounti ...
The experimental results of several bond tests on masonry blocks made of yellow tuff and bonded with different types of Fibre Reinforced Plastic (FRP) fabrics carried out by the authors are presented and analysed. The discussion of results is mainly focuse ...
A novel mode II fracture test setup based on a simple tensile loading scenario with a discontinuous ply specimen is proposed in the paper as the first step towards determination of the cohesive law of composite layer interfaces. Key outputs of the procedur ...
Within the strengthening techniques of masonry elements with Fiber Reinforced Plastic (FRP) materials, the use of FRP grid applied with cement based mortar seems to be very promising and interesting, mainly due to the compatibility of the mortar with the m ...
The paper presents experimental results concerning the comparison of tensile and compressive basic creep behaviours at early ages of two different concretes: a normal strength concrete (NSC) and a very high strength fibre reinforced concrete (HPFRC). This ...
The punching resistance of actual reinforced concrete flat slabs is potentially influenced by the compressive membrane action, which may significantly increase their resistance compared to isolated laboratory specimens. However, design codes have been deve ...
Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec2014
The performance of fibre reinforced plastic (FRP) materials used for external strengthening depends strongly on the bond behaviour at the FRP-substrate interface. In this paper, the results of an analytical model and of two Finite Element (FE) models (bi-a ...
This paper focuses on the numerical modelling of SentryGlas-laminated reinforced glass beams. In these beams, which have been experimentally investigated in preceding research, a stainless steel reinforcement section is laminated at the inner recessed edge ...
This paper presents a study of a system of post-tensioned structural glass beams. In order to increase the initial fracture strength of glass beams and provide residual load-carrying capacity in the event of glass failure, annealed laminated glass beams ar ...
