Publication

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Publications associées (34)

Innovative thermophysical characterization of an ATF composite cladding: the case of silicon carbide

Nuclear power is a powerful technology that plays an important role in the fight against climate change, and research is continuously engaged in studies that could further improve its safety. After the Fukushima accident, Accident Tolerant Fuels research h ...

EPFL2024

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Novel pulsating heat pipe for high density power data centres: performance and flow regime analysis

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

With the advancement of technologies such as Artificial Intelligence and 5G telecommunications, where computational rate is constantly pushing its limits, highly efficient and reliable cooling devices are starting to become an overly critical factor. Not o ...

IEEE2021

Impact of air-flow on thermal performance of air-spaces behind cladding (ASHRAE 1759-TRP)

Dolaana Khovalyg, Mohammad Rahiminejad

The project ASHRAE 1759-RP addresses the impact of the ventilated cavity behind external claddings on the thermal performance of the wall structure by defining “effective thermal resistance” of air gaps based on the linearized network of thermal resistance ...

ASHRAE2020

Recommendations for Improved Welding Procedures for Thick Steel Plates Through Thermo-Mechanical Analysis

Dimitrios Lignos

Welding of steel plates is accompanied by residual stresses that increase as the constraint provided by the welded components becomes greater. Consequently, crack initiation has been reported after welding thick plates due to the high residual stresses dev ...

2019

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Jean-Marie Drezet

Near interfacial residual stresses are investigated in a joint composed of aluminum alloy and dual phase steel. A small step neutron diffraction scan was initially performed to determine the weld interface position along the measured transverse cross secti ...

ELSEVIER SCIENCE SA2019

Interface microstructure formation of dissimilar Fe/Fe-Mn-C steel RSW joints

Léa Deillon

An experiment was developed to simulate the interface between liquid high manganese carbon steel and solid ultra-low alloyed steel in a thermal gradient, corresponding to the nugget/sheet interface of resistance spot welds. Despite the large difference in ...

Elsevier Science Sa2018

Boltzmann Transport in Nanostructures as a Friction Effect

Nicola Marzari, Andrea Cepellotti

Surface scattering is the key limiting factor to thermal transport in dielectric crystals as the length scales are reduced or when temperature is lowered. To explain this phenomenon, it is commonly assumed that the mean free paths of heat carriers are boun ...

Amer Chemical Soc2017

Shear loaded friction-welded crosswise arranged timber boards

Yves Weinand, Till Vallée, Benjamin Hahn

Friction welding of wood is a bonding technology that can be used for joining timber elements, and in which the adhesive is formed from thermally modified cell wall material within the substrate during the welding process. In this paper, this principle is ...

2017

Proposed modeling approach of welding procedures for heavy steel plates

Dimitrios Lignos

A numerical modeling approach is proposed to assess the effectiveness of automatic submerged arc welding procedures for steel plates with thickness larger than 50 mm. The scope of study includes partial joint penetration butt welds, their numerical analysi ...

Elsevier2016

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search