Multiaxial ultra low cycle fatigue in welded high strength steel structural components
Publications associées (40)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Welding is an important joining method for the work with metals. During the welding process, the material is heated and deforms plastically which leads a change in microstructure in the heat affected zone, to complex residual stress distributions, and dist ...
Ultra-High Performance Fiber-Reinforced Concrete (UHPFRC) can be considered, due to its high strength and improved durability, as one of the leading recent innovations in civil engineering. Material scientists have developed a very efficient, high-tech mat ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
Reliable collapse assessment of structural systems under earthquake loading requires analytical models that are able to capture component deterioration in strength and stiffness. For calibration and validation of these models, a large set of experimental d ...
This book presents a refined methodology to predict fatigue life of high-strength steels: Uniform Material Law (UML) for High-Strength Steels. In contrast to other available methods, UML is a handy method as only tensile strength data of metals are needed ...
Intergranular penetration of liquid 18 K gold into a superaustenitic stainless steel, which occurs during laser welding of these two materials, has been studied using a C-ring device which can be put under tensile stresses by a screw. It is shown that liqu ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
Fatigue tests were carried out on welded circular hollow section K-joints typical to bridges. The tests specimens were large-scale (approximately 9 m long and 2 m high) trusses loaded in the plane of the truss. Measured member stresses showed that a signif ...
In the design of recently constructed steel-concrete composite bridges using hollow section trusses for the main load carrying structure, the fatigue verification of the tubular truss joints has been a main issue. Recent research on the fatigue behaviour o ...
In this study, the multiaxial fatigue strength of full-scale transversal attachment is assessed and compared to original experimental results and others found in the literature. Mild strength S235JR steel is used and an exploratory investigation on the use ...