Abnormal Grain Growth in AlScN Thin Films Induced by Complexion Formation at Crystallite Interfaces
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The microstructures of alloys created via Additive Manufacturing (AM) can vary substantially from those present in cast or wrought products, due to the very rapid solidification associated with AM. While numerous studies have investigated the process-micro ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The characteristic functionality of ferroelectric materials is due to the symmetry of their crystalline structure. As such, ferroelectrics lend themselves to design approaches that manipulate this structural symmetry by introducing extrinsic strain. Using ...
This paper investigated the property evolutions of Mo thin films that were subjected to post-sputtering heat treatments from 700 degrees C to 1100 degrees C. It was found that, after annealing, the use of Si wafers eliminated crack formations found in prev ...
Deformation in nanocrystalline (NC) materials is strongly influenced by the presence of a large fraction of grain boundaries. We present a comparative study on the role of intragranular root-mean-square strain and crystal-lographic texture on recovery proc ...
We implement the C-shaped sample test method and micro-cantilever beam testing to measure the local strength of microscopic, low-aspect-ratio ceramic particles, namely high purity vapor grown a-alumina Sumicorundum (R) particles 15-30 mu m in diameter, kno ...
Polycrystalline chemical vapour deposited ZnO films are commonly used as transparent electrodes for photovoltaic devices. Over the past years much effort has been put into improving their properties. Even though these films are now well optimised for speci ...
The grain boundary network evolution of 316L austenitic steel powder during its densification by hot isostatic pressing (HIPing) was investigated. While the as-received powder contained a network of random high angle grain boundaries, the fully consolidate ...
Formation and mobility of domain walls in ferroelectric materials is responsible for many of their electrical and mechanical properties. Domain wall continuity across grain boundaries has been observed since the 1950's and is speculated to affect the grain ...
Nanopowders are continuously under investigation as they open new perspectives in numerous fields. There are two main challenges to stimulating their development: sufficient low-cost, high throughput synthesis methods which lead to a production with well-d ...
