Publication

Integrated Design, Optimization, and Experimental Realization of a Steam-Driven Micro Recirculation Fan for Solid Oxide Fuel Cell Systems

Patrick Hubert Wagner
2019
Thèse EPFL
Résumé

This thesis presents the results of the design and experimental investigation of a patented 10 kWel solid oxide fuel cell (SOFC) system with a thermally-driven anode off-gas recirculation (AOR) fan, the so-called fan-turbine unit (FTU). The system has the advantage of higher global fuel utilization, and thus higher efficiencies and/or lower local fuel utilization, increasing the fuel cell stack lifetime. Electrical net DC efficiencies, based on the lower heating value (LHV) of 65 % for a global fuel utilization of 92 % are demonstrated with a system simulation and optimization. This correlates to an electrical gross DC efficiency based on the LHV of 69 %. Additionally, the waste heat of the SOFC stack can be used for local cogeneration in heating or cooling applications leading to a net utilization ratio (cogeneration of heat and electricity) of 90 %. Other advantages of this system design include the absence of a water supply, a simplified water treatment system, and the reduction of the evaporator and pump component size, which reduces the system's initial and maintenance costs. A first FTU proof-of-concept was designed, manufactured, and extensively experimentally tested. The radial inducer-less fan with a tip diameter of 19.2 mm features backward-curved prismatic blades with a constant height. Prior to coupling the recirculation fan with the SOFC, the fan was experimentally characterized with air at 200 °C. At the nominal operational point of 168000 rpm, the measured inlet mass flow rate was 4.9 kg/h with a total-to-total pressure rise of 55 mbar, an isentropic total-to-total efficiency of 55 %, and a power of 18 W. Although the consumed fan power is very low, this FTU can increase the net efficiency of a 10 kWel SOFC system by five percentage points. The fan and shaft are propelled by a radial-inflow, partial-admission (21 %), low-reaction (13 %) steam turbine with prismatic blades. This turbine has a diameter of 15 mm and consists of 59 rotor blades with a radial chord of 1 mm and a blade height of 0.6 mm. At the design point, it has a total-to-total pressure ratio of 1.9, an inlet mass flow rate of 2.1 kg/h, and an isentropic total-to-static efficiency of 38 %, yielding a power of 36 W. To the best of the author's knowledge, it is one of the smallest steam turbines in the world. The shaft features one single-sided spiral-grooved thrust and two herringbone-grooved journal gas film bearings. Nominally, these bearings operate with water vapor at temperatures up to 220 °C. The bearings were tested with ambient air, hot air, and water vapor to rotational speeds up to 220000 rpm, suggesting very stable operation (rotor orbit less than 0.002 mm). Within this work, the recirculation unit operated for more than 300 hours. In a final step, the FTU was coupled in-situ to a 6 kWel SOFC system, reaching electrical gross DC efficiencies, based on the LHV, of 66 % in part load (4.5 kWel) and 62 % in full load (6.4 kWel) for a global fuel utilization of 85 %. To the best of the author's knowledge, this was the first time that a steam-driven AOR fan was demonstrated in-situ with an SOFC system.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Concepts associés (36)
Pile à combustible
Une pile à combustible est un générateur électrochimique produisant une tension électrique grâce à l'oxydation sur une électrode d'un combustible réducteur (par exemple le dihydrogène) couplée à la réduction sur l'autre électrode d'un oxydant, tel que l'oxygène de l'air. Elle est distincte de la pile électrique, qui fonctionne également par réaction d'oxydoréduction, mais qui est constituée d'empilements de métaux. vignette|Pile à combustible de la NASA au méthanol.
Pile à combustible à oxyde solide
Les piles à combustibles à oxydes solides (ou SOFC selon l'acronyme anglais de Solid oxide fuel cells) sont prévues essentiellement pour les applications stationnaires avec une puissance de sortie allant de 1 kW à 2 MW. Elles fonctionnent à très hautes températures, typiquement entre et (723 et 1273 K). Leurs rejets gazeux peuvent être utilisés pour alimenter une turbine à gaz secondaire afin d'accroître le rendement électrique.
Véhicule à pile à combustible
Un véhicule à pile à combustible (VPC) ou véhicule électrique à pile à combustible est un véhicule électrique qui utilise une pile à combustible, parfois en combinaison avec une petite batterie ou un supercondensateur, pour alimenter son moteur électrique embarqué. Les piles à combustible sont alimentées par un carburant qui peut être en particulier l'hydrogène, le méthanol, l'éthanol ou l'acide formique. Ces véhicules ont un bilan carbone faible par rapport aux véhicules à moteur à combustion interne, en particulier suivant le mode de production du carburant alimentant la pile.
Afficher plus
Publications associées (81)

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Philippe Aubin

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...
EPFL2024

Two novel cogeneration charging stations for electric vehicles: Energy, exergy, economic, environment, and dynamic characterizations

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

This paper suggests two novel designs for the electric vehicle charging stations using LiMn2O4 Lithium-ion battery and based on a Solid Oxide Fuel Cell (SOFC) and absorption refrigeration cycle (ARC) technologies to provide electricity and cooling, respect ...
PERGAMON-ELSEVIER SCIENCE LTD2022

Organic Rankine Cycle as the Waste Heat Recovery Unit of Solid Oxide Fuel Cell: A Novel System Design for the Electric Vehicle Charging Stations Using Batteries as a Backup/Storage Unit

Jan Van Herle, Hossein Pourrahmani, Chengzhang Xu

The novelty of this study is to suggest a novel design for electric vehicle charging stations using fuel cell technology. The proposed system benefits from the Organic Rankine Cycle (ORC) to utilize the exhaust energy of the Solid Oxide Fuel Cell (SOFC) st ...
MDPI2022
Afficher plus
MOOCs associés (4)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Thermodynamique II
Ce cours complète le MOOC « Thermodynamique : fondements » qui vous permettra de mettre en application les concepts fondamentaux de la thermodynamique. Pour atteindre cet objectif, le Professeur J.-P
Afficher plus