Effect of cooling conditions on microstructures and mechanical behaviors of reheated low-carbon weld metals
Publications associées (47)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Mechanical properties of nanostructures could be remarkably different from their bulk counterparts owing to scale effects, which have attracted considerable research interest in recent years. However, nanomechanics studies are hindered by the difficulties ...
A novel concept for an advanced fenestration system was studied and samples were produced to demonstrate the feasibility. The resulting novel glazing will combine the functions of daylighting, glare protection, and seasonal thermal control. Coated microstr ...
Structural fire endurance experiments were conducted on full-scale cellular glass fiber-reinforced (GFRP) columns under axial compression and subjected to ISO834 fire exposure from one side. Unprotected columns can resist fire for more than 30 min, which i ...
High zirconia refractories are composed of a zirconia skeleton surrounded by an intergranular glassy phase. In these materials, zirconia undergoes up to two successive phase transitions during the manufacturing process, c → t then t → m. This leads, after ...
The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...
Photodegradation of wood leads to discolouration and delignification, inducing damage to the cellular structure. This study is an investigation of the damage and loss of tensile strength of the cellulose fibres in spruce (Picea abies). Microtensile tests i ...
The crystallography of bainite, transformed isothermally at 450 °C in 0.2C-2.0Mn-1.5Si-0.6Cr steel, was investigated by electron backscatter diffraction (EBSD) analysis. The orientation relationship (OR) was found to be closer to Nishiyama-Wassermann (N-W) ...
Carbon nanotubes (CNTs) are grown on PAN-based carbon fibers by means of catalytic chemical vapor deposition technique. By using catalytic thermal decomposition of hydrocarbon, CNTs can be grown in the temperature range of 650750 degrees C. However, carbon ...
Ternary Au-Cu-Pt alloys, of unequal gold and copper atomic contents and containing 2.5 wt.% Pt, are ordered isothermally at 250 or 400 degrees C after annealing at 650 degrees C and quenching in water. The alloys are characterized by transmission electron ...
Structural fire endurance experiments were conducted on full-scale cellular glass fiber reinforced (GFRP) columns under axial compression and subjected to ISO 834 fire exposure from one side. Unprotected columns could resist fire for more than 30 min, whic ...
Springer-Verlag New York, Ms Ingrid Cunningham, 175 Fifth Ave, New York, Ny 10010 Usa2010