The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Ultra High-Performance Fibre-Reinforced Concrete (UHPFRC) combines high strength, deformation capacity and low permeability. This makes UHPFRC particularly suitable as a strengthening and protective layer for application to existing reinforced concrete str ...
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...
We present a detailed comparison of the rheology of concentrated hard and soft-sphere suspensions using a variety of techniques including large-amplitude oscillatory shear (LAOS). While the soft spheres are jammed and exhibit permanent contact, the hard-sp ...
We extend the analysis of Hutchinson and Neale (Hutchinson JW, Neale KW. Acta Metall 1977;25:839) and Ghosh (Ghosh AK. Acta Metall 1977;25:1413) predicting the tensile elongation to failure of strain-rate-dependent plastic materials to two-phase composites ...
A MLS-based lattice spring model is presented for numerical modeling of elasticity of materials. In the model, shear springs between particles are introduced in addition to normal springs. However, the unknowns contain only particle displacements but no pa ...
The overall aim of this thesis has been to assess the potential of latex-based technologies for the preparation of polymer/clay nanocomposites. The key feature of latex-based technologies is that they offer the possibility of improved control of the final ...
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
The extremely low permeability of Ultra High Performance Fibre Reinforced Concretes (UHPFRC) associated to their outstanding mechanical properties make them especially suitable to locally "harden" reinforced concrete structures in critical zones subjected ...
Reinforced concrete being the most applied construction material today performs very well in most applications but still lacks durability under severe environmental conditions. Especially existing structures built decades ago show degradation. Using Ultra- ...
High Performance Cement-based composites such as some UHPFRC or SHCC exhibit a tensile strain hardening response associated to the progressive formation of finely distributed microcracks. Strain Hardening (SH) - UHPFRC with suitable fibrous mixes have a de ...
