Silicon Corrosion in Neutral Media: The Influence of Confined Geometries and Crevice Corrosion in Simulated Physiological Solutions
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The effect of body fluids inorganic species on element-specific dissolution of a Mg-Y-Rare earth elements (RE) alloy was investigated by flow microcapillary plasma mass spectrometry. A new important aspect of this method is the online monitoring of precipi ...
The corrosion and tribocorrosion of tungsten in 0.01 M H2SO4, without and with the presence of lactic acid and phosphoric acid as chelating agents was studied here. ...
In the present study, a forged CoCrMo (ISO 5832-12) has been subjected to pulsed plasma treatment in a N-2/H-2 atmosphere at low temperatures (below 500 A degrees C). This treatment resulted in the formation of a layer composed by dispersed chromium nitrid ...
Two different methods for estimating the corrosion resistance of low alloy stainless steels are compared: critical pitting temperature according to a modified ASTM G150 with a low chloride concentration (0.1M), and pitting potentials from polarisation curv ...
The present work focuses on stress-corrosion mechanisms in soda-lime silica glass. Four-point beam-bending tests were performed on small specimens, measuring failure time in function of temperature and relative humidity. By using linear elastic fracture me ...
Investigation of the microstructure, properties and biocompatibility of the Ti-6Al-4V alloy nitrided under glow discharge was performed. The microstructural analyses were carried out using light microscopy, X-ray diffraction, analytical scanning and transm ...
The corrosion behaviour and the wear ranking of biomedical high carbon (HC) and low carbon (LC) CoCrMo alloys sliding against an alumina ball in four different simulated body fluids [NaCl and phosphate buffered solutions (PBS) with and without albumin] has ...
The deterioration of reinforced concrete structures and the associated rehabilitation work represent an economic cost of premier importance. In Switzerland, the structural maintenance expenditures amount to 40% to 65% of the initial construction cost (over ...
Ozone prodn. in 5M H2SO4 with Ti/IrO2/SnO2 - Sb2O5 electrodes was studied. Electrodes were prepd. at 550 Deg by spray pyrolysis of a soln. of precursors contg. tin and antimony chlorides. The aim of this work was to elucidate the mechanism of activation an ...
The management of existing road infrastructures is a multidisciplinary activity that involves structural engineering, material science, management, economics and ecology. The objective is to achieve maximum availability of road links at minimum societal co ...
