Effect of the electrochemical characteristics of titanium on the adsorption kinetics of albumin
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Protein adsorption on biomedical CoCrMo alloys plays a crucial role in biocompatibility, corrosion and wear properties of implants. So far, protein adsorption was studied only on passive CoCrMo alloys above the open circuit potential. In this work the adso ...
In this paper, the degradation mechanisms of the ceramic and the metal in Titanium/Zirconia pairs for biomedical applications were analyzed. To do that, an experimental set-up with well-controlled mechanical and chemical conditions was used based on a unid ...
Nd1.95NiO4+delta (NNO) cathode supported microtubular cells were fabricated and characterized. This material presents superior oxygen transport properties in comparison with other commonly used cathode materials. The supporting tubes were fabricated by col ...
Pure Magneli Ti4O7 nanotube arrays (NTA) were successfully fabricated by reducing TiO2 NTA with hydrogen at 850 degrees C for 30 minutes. The microstructure, composition and electrochemical behavior of the prepared Ti4O7 NTA were characterized by means of ...
Adsorption of Bovine Serum Albumin (BSA) on an anodically passivated CoCrMo biomedical alloy has been studied using the Electrochemical Quartz Crystal Microbalance (EQCM) in phosphate buffer solution at 37 degrees C. CoCrMo layers were deposited on the qua ...
Electrochemical reduction of carbon dioxide (CO2) to multi-carbon products such as ethylene, ethanol and n-propanol offers a promising path for utilization of excessive CO2 and energy storage. Oxide-derived Cu electrodes are among the best electrocatalysts ...
This study investigates the effect of the diameter of TiO2 nanotubes and silver decorated nanotubes on optical properties and photocatalytic inactivation of Escherichia coli under visible light. The TiO2 nanotubes (TiO2 -NTs) were prepared using the electr ...
We report on the development of electrochemical etching technology for the production of multilayer porous structures |(MPS) allowing one to fabricate Bragg reflectors on the basis of GaN bulk substrates grown by Hydride Vapor Phase Epitaxy |(HVPE). The fo ...
In searching for a suitable semiconductor material for hydrogen production via photoelectrochemical water splitting, alpha-Fe2O3 received significant attention as a promising photoanode due to its band gap (similar to 2.1 eV), good stability, low cost, and ...
The triode solid oxide fuel cell (SOFC) is a three electrodes configuration. The third electrode, so-called auxiliary, is connected in a way to run in electrolysis mode, while cathode and anode operate in normal fuel cell mode. This mixed operation allows ...