Evaluation of a Dynamic Transfer Matrix for a Hydraulic Turbine
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
To protect spillways against cavitation damage, adding a small air concentration to the flow close to the invert is efficient. Aerator performance on smooth chutes was therefore well studied in terms of air entrainment and downstream air concentration deve ...
This paper presents a study of similarities between electrical and hydraulic pressurized networks. The primary objective is to examine whether or not it is possible to use electrical laboratory networks measuring voltage to study leak-region detection stra ...
The importance of renewable energy sources for the electrical power supply has grown rapidly in the past decades. Their often unpredictable nature however poses a threat to the stability of the existing electric grid. Hydroelectric powerplants play an impo ...
Application of stepped spillways increases the energy dissipation rate along the spillway and may reduce the dimensions of the terminal energy dissipation structure. This pronounced energy dissipation makes stepped chutes attractive under various condition ...
Pressure changes in the above zone, i.e., the overlying aquifer of an injection zone separated by a sealing caprock, are usually attributed to leakage through wells. However, pressure changes can be induced geomechanically due to rock deformation without a ...
Hydraulic machines subject to off-design operation involve the presence of cavitating flow regimes in the draft tube. The cavitation vortex rope at part load conditions is described as an excitation source for the hydraulic system, and interactions between ...
The weir is a fundamental structure in hydraulic engineering, serving to retain a water body, to control a water level, facilitate flow diversion, or to measure discharge. Under particular site conditions, the cross-sectional width at the weir location is ...
Hydraulic machines operating in a wider range are subjected to cavitation developments inducing undesirable pressure pulsations which could lead to potential instability of the power plant. The occurrence of pulsating cavitation volumes in the runner and t ...
The cavitation helical vortex rope arising at Francis turbine partial load induces pressure fluctuations at the rope precession frequency, which can be decomposed into two components; the convective one and the synchronous one. The latter acts as an excita ...
The tip leakage vortex (TLV), which develops in the clearance between the blade tip and the casing of axial turbomachines, appears in many industrial applications, such as air transportation, space rockets and hydraulic machines. In the latter, cavitation ...
