Low-Cost and Highly Efficient Carbon-Based Perovskite Solar Cells Exhibiting Excellent Long-Term Operational and UV Stability

Seckin Akin, Neha Arora, Thomas Paul Baumeler, Mohammad Ibrahim Dar, Michael Graetzel, Yuhang Liu, Ryusuke Uchida, Shaik Mohammed Zakeeruddin
WILEY-V C H VERLAG GMBH, 2019
Article

Résumé

Today's perovskite solar cells (PSCs) mostly use components, such as organic hole conductors or noble metal back contacts, that are very expensive or cause degradation of their photovoltaic performance. For future large-scale deployment of PSCs, these components need to be replaced with cost-effective and robust ones that maintain high efficiency while ascertaining long-term operational stability. Here, a simple and low-cost PSC architecture employing dopant-free TiO2 and CuSCN as the electron and hole conductor, respectively, is introduced while a graphitic carbon layer deposited at room temperature serves as the back electrical contact. The resulting PSCs show efficiencies exceeding 18% under standard AM 1.5 solar illumination and retain approximate to 95% of their initial efficiencies for >2000 h at the maximum power point under full-sun illumination at 60 degrees C. In addition, the CuSCN/carbon-based PSCs exhibit remarkable stability under ultraviolet irradiance for >1000 h while under similar conditions, the standard spiro-MeOTAD/Au based devices degrade severely.

Official source

https://infoscience.epfl.ch/record/276917?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Publications associées (102)

Perovskite solar cells have become strong contenders in the arena of photovoltaics due to the stunning rise in their efficiency from 3 % to over 20 % in just seven years. In this time, numerous device architectures and thin film deposition methods have been explored. The sequential deposition and anti-solvent methods are among the most widely used for preparing perovskite solar cells. Optimizing these perovskite deposition processes to tune the perovskite film morphology plays a key role in the race for the highest efficiencies as homogeneity of the film correlates with superior photovoltaic performance. To date, the factors controlling perovskite film formation in various deposition methods and the precise mechanism are little understood. In light of this, the aim of the thesis is to unravel the salient aspects of perovskite film formation. I first study the formation of methylammonium lead iodide in sequential deposition using confocal laser scanning fluorescence microscopy (CLSM) and scanning electron microscopy (SEM). I discover that illumination during film formation is a major factor in the reaction as it greatly accelerates perovskite formation and tunes the final film morphology by controlling nucleation of lead iodide. The nucleation density increases logarithmically with the illumination intensity. I uncover the mechanism behind this effect and demonstrate that it is a quantum phenomenon and not merely a heating effect. I posit that absorbed light lowers the surface tension, thereby facilitating nucleation. Not only is this effect present in the main deposition methods â sequential deposition and the anti-solvent methods, but also in perovskites of more complex compositions that are employed in state-of-the-art solar cells. Second, I scrutinize the individual stages in the formation of methylammonium lead iodide perovskite in sequential deposition. SEM-cathodoluminescence imaging identifies the presence of mixed crystalline aggregates composed of methylammonium lead iodide perovskite and lead iodide in forming perovskite films. Using cross-sectional CLSM for the first time, I identify the directionality of perovskite formation. Kinetic monitoring and model fitting bring forward the Avrami models as the most suitable to quantify and represent the formation of perovskite under different conditions of temperature, film thickness and illumination. Finally, I identify a maturation effect in the perovskite film in solar cells stored in the dark and investigate the dynamic spontaneous coalescence of crystals in the film. During maturation, small crystals merge to form larger ones and this reduces the number of grain boundaries and the associated trap states, supressing non-radiative recombination. The photovoltaic performance of high efficiency solar cells thus increases and it is accompanied by a reduction in the hysteresis. Overall, apart from providing insights into the dynamic nature of deposited films, I present a fundamental understanding of the perovskite formation process in different deposition methods and for various compositions. Such a comprehensive picture aids in the achievement of high photovoltaic performance.

EPFL2018

Chargement

High Open Circuit Voltage for Perovskite Solar Cells with S,Si-Heteropentacene-Based Hole Conductors

Neha Arora, Mohammad Ibrahim Dar, Amaresh Mishra, Shaik Mohammed Zakeeruddin

High photovoltage in perovskite solar cells (PSCs) can be achieved by designing new hole transporting materials (HTMs) with relatively deeper energy levels of the highest occupied molecular orbital (HOMO). Here, we report on the synthesis of a new heteroacene-based HTM (HTM-1) and demonstrate its potential in the fabrication of FAPbBr(3) [FA = CH(NH2)(2)] PSCs yielding V-OC as high as 1.55 V, a record value for this light harvester. The energetic position of the frontier orbitals of HTM-1 was estimated using electrochemical measurements, and the charge transport across the interfaces was studied using steady-state and time-resolved photoluminescence. When spiro-OMeTAD (HOMO = -5.1 eV) is replaced with HTM-1 (HOMO = -5.3 eV), the V-OC increases from 1.51 to 1.55 V, whereas the J(SC) value decreases from 7.0 to 5.7 mA cm(-2). The similar trade-off between J(SC) and V-OC is observed for efficient iodide-based PSCs, suggesting that there is a critical energy level for the HOMO below which overall photovoltaic performance will suffer. After probing at a maximum power point under full-sun illumination at 60 degrees C for a duration of 120 h, the FAPbBr(3) PSCs based on HTM-1 retained approximate to 95 % of their initial efficiency, which demonstrates their robust operational stability.

WILEY-V C H VERLAG GMBH2018

Chargement

Maltose as an Ecofriendly Modifier of the Buried Interface for Efficient and Stable Inverted Perovskite Solar Cells

Yi Ding, Hong Zhang

A new concept of modifying the buried interface with ecofriendly material to improve the photovoltaic performance of inverted perovskite solar cells (PSCs) is proposed. A low-cost and ecofriendly maltose with multihydroxyl groups is facilely chosen for the proof of our concept. The maltose modification not only improves the hole mobility of hole transporting layer, but also regulates the formation of a high-quality perovskite film with a low density of gain boundary and trap states. The resulting inverted PSCs show a champion power conversion efficiency of 20.65% with negligible hysteresis, accompanied by enhanced thermal and operational stability. This work shows that buried interface engineering with ecofriendly materials opens a new avenue to further improve the efficiency and stability of sustainable PSCs.

WILEY-V C H VERLAG GMBH2022

Chargement

Afficher plus

EPFL2018