Publication

Experiments and numerical modelling on angle-ply laminates under remote mode II loading

Publications associées (51)

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.

Connectez-vous pour utiliser Chat avec Graph Search

Fracture of thin-ply composites

Guillaume Frossard

The demand for carbon/epoxy laminated composites is continuously increasing due to their high specific modulus and strength. Among them, laminates made of particularly thin layers (from t=0.015 to 0.150 mm) and called thin-ply composites are gaining in int ...

EPFL2017

Physical Phenomena in Dynamic Failure of Concrete at the Mesoscale

Okan Yilmaz

The aim of the present thesis is to model numerically the dynamic failure behavior of concrete at the mesoscale. Concrete is the world's most widely used construction material and the structures made of it are subjected to dynamic loads during their long s ...

EPFL2017

Dynamic crack propagation with a variational phase-field model: limiting speed, crack branching and velocity-toughening mechanisms

Jean-François Molinari, Jérémy Bleyer, Clément Pierre Mathieu Roux-Langlois

We address the simulation of dynamic crack propagation in brittle materials using a regularized phase-field description, which can also be interpreted as a damage-gradient model. Benefiting from a variational framework, the dynamic evolution of the mechani ...

2017

Atomistic study of hydrogen embrittlement of grain boundaries in nickel: I. Fracture

William Curtin, Ali Tehranchi

Hydrogen ingress into a metal is a persistent source of embrittlement. Fracture surfaces are often intergranular, suggesting favorable cleave crack growth along grain boundaries (GBs) as one driver for embrittlement. Here, atomistic simulations are used to ...

Elsevier2017

A cohesive zone model (CZM) is proposed to assess the thickness scaling effect associated with fiber bridging during fracture. The CZM was developed through a multi-scale simulation approach and utilizes an embedded cell model of the Double Cantilever Beam ...

Elsevier2017

Delamination propagation in fibrous laminates is often accompanied by development of a damage zone, within which intact fibers bridge the crack faces that constitutes a major toughening mechanism. A direct experimental assessment of the crack closure tract ...

EPFL2016

This paper presents detailed experimental information on mode-II delamination development in fibre/epoxy composite materials and provides observations about the process zone in the vicinity of the crack tip. It is shown that the energy dissipated in delami ...

Elsevier2016

Mixed mode fracture behavior of welded wood joints investigated with the Arcan test

John Botsis, Joël Cugnoni, Parviz Navi, Martin Rhême

Friction welding of wood is an assembly method that is still under investigation and development. A possible application for welded wood joints is the fabrication of multi-layered panels (i.e., cross-laminated panels). In an effort to model the behavior of ...

Springer Verlag2016

, , , ,

We extend to flat surfaces the fracture toughness method presented in Acts Materialia vol. 86 (2015) p.385 and measure in this manner the fracture toughness of fused quartz. Tests give 0.67 +/- 0.01 MPa m(1/2) which agrees with earlier microscopic and macr ...

Elsevier2016

Mixed-Mode I/II fracture behavior of asymmetric composite joints

Thomas Keller, Anastasios Vassilopoulos, Moslem Shahverdi

The partitioning of the total strain energy release rate, G(tot), into the Mode I, G(I), and Mode II, G(II), components is challenging, especially in asymmetric cracks. Although many researchers have studied the fracture behavior of composite materials und ...

Elsevier Science Bv2016