Influence of local fiber distribution on tensile behavior of strain hardening UHPFRC using NDT and DIC
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Nanocrystalline metals have been an area of great interest in recent years due to their enhanced characteristics. One of the most striking is implied by the Hall-Petch relation: with decreasing grain size the material becomes stronger. This promise is fulf ...
In this study, the tensile and fracture properties and the microstructure of the reduced-activation tempered martensitic steel Eurofer97 have been investigated. This technical alloy is a 9%Cr steel developed within the European fusion material research pro ...
An assessment of the true stress-true strain relationship has been done by means of tensile and small ball punch tests on austenitic and tempered martensitic steel at room temperature. A finite element model was developed and validated to calculate the for ...
Formulating effective coatings for use in nano- and biotechnology poses considerable technical challenges(1). If they are to provide abrasion resistance, coatings must be hard and adhere well to the underlying substrate(2). High hardness, however, comes at ...
The strain-hardening behaviour of a tempered martensitic iron-chromium-carbon model was examined in terms of dislocation mechanics. Tensile tests of this body-centered cubic alloy were carried out from 77 up to 293 K. A specific relationship between the fl ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
This article presents metal ion implantation as an alternative technique to fabricate compliant electrodes for small-size dielectric elastomer actuators. When reducing the size of these actuators to below 1 cm, the ability to pattern the electrodes is adde ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...