Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC) is a promising building material for applications where high compressive and tensile strengths, deformability and increased durability are required. Especially for the rehabilitation of existing str ...
Hot tearing, a severe defect occurring during solidification is the conjunction of tensile stresses which are transmitted to the mushy zone by the coherent solid underneath and of insufficient liquid feeding to compensate for the volumetric change. The RDG ...
Th. Böllinghaus, H. Herold, C. E. Cross and J.C Lippold2008
Desiccation cracking of soils is of great importance in geotechnical and geoenvironmental engineering. In many circumstances it is the cause of damages in earthen and soil supported structures. Desiccation cracking affects clayey soil barriers for waste st ...
This paper is an experimental and numerical investigation of desiccation and the associated cracking. First an elastic formulation of the hydro-mechanical problem is presented, based on an analogy that can be drawn with thermo-elasticity. Then, the results ...
Tensile tests have been performed on replicated aluminum alloy foams of relative density between 4.5% and 8%. During the test the electrical resistance was measured with a four-point set-up and the displacements along the gage section were measured using a ...
Bending behaviour of members without ordinary reinforcement made of quasi-brittle materials (such as concrete or fibre-reinforced concrete) is subjected to size effect both in terms of strength and ductility. For a typical ultra-high performance fibre-rein ...
Ultra High Performance Concrete (UHPC), Second International Symposium on Ultra High Performance Concrete2008
Direct load transmission experiments on hybrid short-span beam specimens for a novel bridge deck were performed. The sandwich construction consists of three layers: a fiber- reinforced polymer composite (FRP) sheet with T-upstands for the bottom skin, ligh ...
The influence of applied stress on the equilibrium shape of a liquid intergranular inclusion is derived to show that (i) results differ significantly from those for a void, and (ii) this difference explains the experimental data if liquid inclusions behave ...
The origin of intragranular variations of the crystallographic orientation in hot-dip Al-Zn-Si coatings is discussed based on new experimental results and modelling. The solidification microstructure in as-received 55Al-43.4Zn-l.6Si (in wt.%) coatings depo ...
Reinforced glass beams. At the faculty of Architecture at Delft University of Technology, a research group focuses on the development of transparent structures and components with safe failure behaviour. One of the concepts currently under investigation is ...
