Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Al-Cu matrix composites with a high volume fraction of alumina particles (41-62%) prepared by gas-pressure infiltration are characterized in tension and chevron-notch fracture testing before and after heat-treatment. Their mechanical behaviour is shown to ...
Ultra-High Performance Fibre-Reinforced Concretes (UHPFRC) have high mechanical strengths (fU,c > 150 MPa, fU,t > 6 MPa) and exhibit quasi-strain hardening in tension. Their very low permeability prevents the ingress of detrimental substances. In composite ...
A method to predict the strength of adhesively bonded single and double lap joints from pultruded GFRP composite adherends subjected to quasi-static axial tensile loading is presented. The method is based on a quadratic through- thickness shear-tensile int ...
Axial tension-tension fatigue experiments were performed on pultruded glass fiber reinforced polymer (GFRP) plates in a laboratory environment. Different full-scale specimen shapes were examined: plate strips as-delivered, plate strips with tabs and plates ...
Following ICOM’s participation in the redaction of a new recommendation for the evaluation of existing railway-bridges, in collaboration with the SBB/CFF, new questions have been raised. Among those, the influence of a welded longitudinal attachment ends s ...
A detailed study of the strain-hardening on a Fe-9Cr-0.1C tempered martensitic model alloy has been undertaken in the temperature range of 77-343 K. The true stress-true strain curves were calculated from tensile test data. In the framework of a phenomenol ...
Tensile properties and microstructure of Danocrystalline electrodeposited Ni at temperatures between room temperature and 330° C are presented. Above 300° C low flow stress and high tensile elongation are observed along with grain growth and segreg ...
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
We have used in situ X-ray scattering and finite element modeling (FEM) to examine the micromechanics of deformation of in situ formed metallic-glass-matrix composites consisting of Ta-rich particles dispersed in an amorphous matrix. The strain measurement ...
The microstructural modifications due to irradiation in hcp pure metals and their consequences on the mechanical properties have been investigated. Experimental results for proton-irradiated pure polycrystalline titanium are presented and discussed. Sample ...
