Contemporary approaches towards augmentation of distinctive heterogeneous catalyst for sustainable biodiesel production

In recent times, demand for energy has significantly increased due to the depletion of fossil fuels and the fast-industrial revolution. This has created a wide space for the development of sustainable and renewable energy sources. Biodiesel has attained exceptional contemplation among other biofuels due to the use of renewable and low-cost resources. Selection of suitable catalyst plays a vital role in biodiesel production by a catalytic transesterification reaction. Compared to homogeneous catalysts, heterogeneous catalysts are most preferred as they have high selectivity and stability with increased biodiesel yield. Heterogeneous catalyst has made incredible development in biodiesel production under mild operating conditions and has less impact on the environment. Nanocatalysts are the effective heterogeneous catalyst, which has brought a tremendous revolution in biodiesel production in recent years. Thus, present review provides a comprehensive analysis of the use of heterogeneous catalyst, importance and challenges associated in biodiesel production. (c) 2020 Elsevier B.V. All rights reserved.

Thermo-Economic Optimisation of Solar Tower Thermal Power Plants

James Spelling

Amidst a backdrop of rapidly increasing world-wide electricity demand, solar thermal power generation shows great potential for supplying the electricity needs of numerous countries in the Sun-belt regions of the world. In these regions, the absence of significant biomass, hydrological or geothermal reserves makes solar thermal power the most promising solution for meeting that most fundamental of demands: energy. Amidst the different options available for harnessing the Sun’s power, solar thermal technologies have been shown capable of producing electricity at the most economically viable rates [32]. However, all currently existing solar thermal power plants have been based around the use of Rankine, or steam turbine, cycles which are limited in the efficiencies they can achieve. In order to make better use of the Sun’s energy, higher efficiency cycles should be used. With their high concentration ratios, solar thermal power tower systems are amongst the best options for making use of the Sun’s potential. As the energy delivery temperature of central receiver systems is higher, they harness the solar radiation at a higher exergy level [4]. This higher temperature also opens the road to the use of more advanced thermodynamic cycles. Hybrid fossil-fuel – solar systems are also imaginable [13], as the energy delivery temperature is compatible with standard gas turbine cycles. Hybrid systems can help mitigate the requirements of thermal energy storage, as well as reducing the perceived risk when investing in new solar technology, which stimulates research and development, as well as providing employment. Recent developments in the field of high temperature volumetric receivers [10] along with rock- based packed-bed storage systems have opened up an interesting possibility. High temperature receivers allow the use of higher-efficiency combined-cycle setups, whereas packed-bed units offer the possibility of cheap storage. Larger storage volumes allow pure-solar systems to extend their power production into the night, making hybrid options less attractive. This is compounded by the common practice of guaranteeing a preferred tariff for electricity sales from pure-solar sources With this in mind, a complete dynamic model of a power plant based on the pure-solar concept has been elaborated. The performance of the setup is evaluated over a range of days, using solar insolation profiles obtained from satellite data. In order to examine different design options and their impact on the performance of the power plant, a multi-objective, thermo-economic optimisation of both the power plant superstructure and operating conditions was performed using the new, dynamic models. By means of an evolutionary algorithm [17], a family of Pareto-optimal points were obtained, representing the trade-off between increased power plant efficiency, and lower levelised energy costs. Through use of optimisation, it was shown that exergetic efficiencies in the region of 21-27% can be achieved, for relatively low power outputs of between 3 and 11 MWe. These configurations correspond with levelised electricity costs in the region of 14-21 UScts/kWhe. In most regions, the use of solar power is encouraged by the guarantee of a preferential tariff for electricity sales from renewable sources. Sale of electricity at a price of around 24 UScts/kWhe [32] should therefore be imaginable, ensuring the economic viability of solar thermal power tower systems. It can be concluded that, when properly designed, solar thermal power plants based on combined cycles are both economically and thermodynamically promising. By raising the efficiency of the plant, the size of the solar collector field is diminished, increasing the otherwise low energy densities of solar power systems. By reducing the levelised electricity costs, solar thermal power plants become more economically viable, accelerating their construction and thus, hopefully, reducing our dependence on fossil-fuels.

2009

Energy in the perspective of the sustainable development: The 2000W society challenge

Daniel Favrat, Eberhard Jochem, François Maréchal

As energy plays a central role in the world development, it represents as well a major challenge for sustainable development. Today, more than 80% of the primary energy consumption is based on fossil fuels and the share is likely to remain high in the future. Even if technology developments will reduce the specific consumption, the world energy demand is likely to increase in line with its population. Energy and material efficiency and the integration of the renewable resources will therefore have to play a major role for sustainable development. The challenge concerns not only the technologies at the conversion and useful energy level, but also the energy management and infrastructures. The 2000 W per capita society initiative launched by the Board of the Swiss Institutes of Technology targets the identification of the major technological breakthroughs to reduce the per capita primary energy use of Switzerland by two-thirds within five decades. This study examined the energy saving potentials in the complete conversion chain “from primary energy to energy services” in the main sectors of economy: buildings, transport and industry. The report highlights the possible benefits which could be obtained from new materials, new technologies and an intensification of product and capital use. The systems integration appeared to be of prime importance in order to valorise the exergy potentials of the energy resources. The report emphasizes the political responsibility of developing the enabling society infrastructure: not only for the energy distribution (electrical, gas or heating networks) but also for the information technology, the appropriate regulations, the education and for the necessary integration of the lifetimes of the manufactured artifacts in the pathway to the 2000 W per capita society.

Elsevier2005

Active renovation strategies with building-integrated photovoltaics (BIPV). Application on an early 20th century multi-family building

Sergi Aguacil Moreno

Tomorrow's cities are already largely built, as much of the existing building stock – with a low level of energy performance – will still be standing in 2050. Urban renewal processes therefore play an essential role towards the sustainable transition of European cities. In this context, building-integrated photovoltaic (BIPV) systems can potentially provide a crucial response to achieve current energy and mid- to long-term carbon targets. Functioning both as envelope material and electricity generator, BIPV systems can simultaneously reduce the use of fossil fuels and greenhouse gas (GHG) emissions, while providing savings in materials and electricity costs. These are precisely the objectives of most European energy directives, from zero- to positive-energy buildings. However, despite continuous technological progress and increasingly favourable economic conditions, the significant assets of BIPV remain broadly undervalued in the current practice. Focusing on the architectural design, this paper presents the results of a multi-criteria evaluation in terms of Life-Cycle Assessment (LCA) and Cost (LCC) of different renovation and energy-use scenarios, showing which strategies can allow to achieve the ambitious targets for the 2050 horizon by integrating into the design process: (1) Passive strategies, to improve the envelope through low-embodied energy materials and construction systems; (2) BIPV strategies, using innovative photovoltaic products as a new construction material for façades and roofs, and by selecting the BIPV surfaces in order to synchronize on-site generation with the building consumption profile; (3) Active strategies, adapting the HVAC system to improve its efficiency and maximize PV self-consumption, thus reducing the dependence on feed-in-tariffs to ensure the profitability of investments. The research methodology, presented in this paper through the comparison of different renovation scenarios applied on a 1900’s archetype building in Neuchâtel (Switzerland), proposes a new way to address rehabilitation projects of existing buildings in urban environments towards Low Carbon Buildings. The main outcome provides - to architects and engineers - advanced BIPV renovation strategies depending on the building typology, the architectural design goals, and the level of intervention.