Publication
First observation of spalling in tantalum at high temperatures induced by high energy proton beam impacts
Publications associées (36)
System and methods for differential imaging using a lock-in camera
Christophe Moser, Timothé Laforest, Damien Claude-Marie Loterie, Chiara Bonati
The present invention describes an imaging system that allows visualization of a wide range of samples both in terms of morphology and in terms of material (e.g. density distribution, varying chemical composition, or anything that induces a change of optic ...
2021The Impact of Changes in Resolution on the Persistent Homology of Images
Digital images enable quantitative analysis of material properties at micro and macro length scales, but choosing an appropriate resolution when acquiring the image is challenging. A high resolution means longer image acquisition and larger data requiremen ...
IEEE2021Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements
Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...
EPFL2020The probability of intransitivity in dice and close elections
We study the phenomenon of intransitivity in models of dice and voting. First, we follow a recent thread of research for n-sided dice with pairwise ordering induced by the probability, relative to 1/2, that a throw from one die is higher than the other. We ...
2020Investigations and numerical modeling of mechanical properties of tempered martensitic steel Eurofer97 at various loading rates, temperatures and after spallation irradiation
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
EPFL2018Helium effects on irradiation assisted stress corrosion cracking susceptibility of 316L austenitic stainless steel
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
EPFL2018Periodic cellular aluminum structures for space applications
Mass is one of the crucial parameters for hardware that has to be placed in Earth orbit. Due to its harsh environment, a material with highest specific properties is desired to achieve space missions. The rise and development of new technologies, such as a ...
EPFL2018Mechanical properties of tailored nanostructured alloys produced by electrodeposition
The studies presented in this thesis aim to extend the current knowledge and understanding of the mechanical behavior of nanocrystalline materials with respect to temperature- and time dependence. Free standing electrodeposited nanocrystalline nickel speci ...
EPFL2017Investigation of the relationships between mechanical properties and microstructure in a Fe-9%Cr ODS steel
Ferritic-martensitic Oxide Dispersion Strengthened (ODS) steels are potential materials for fuel pin cladding in Sodium Fast Reactor (SFR) and their optimisation is essential for future industrial applications. In this paper, a feasibility study concerning ...
Edp Sciences S A2016