Sensing of Surface and Bulk Refractive Index Using Magnetophotonic Crystal with Hybrid Magneto-Optical Response

Serguei Sekatski
2021
Article

Résumé

We propose an all-dielectric magneto-photonic crystal with a hybrid magneto-optical response that allows for the simultaneous measurements of the surface and bulk refractive index of the analyzed substance. The approach is based on two different spectral features of the magneto-optical response corresponding to the resonances in p- and s-polarizations of the incident light. Angular spectra of p-polarized light have a step-like behavior near the total internal reflection angle which position is sensitive to the bulk refractive index. S-polarized light excites the TE-polarized optical Tamm surface mode localized in a submicron region near the photonic crystal surface and is sensitive to the refractive index of the near-surface analyte. We propose to measure a hybrid magneto-optical intensity modulation of p-polarized light obtained by switching the magnetic field between the transverse and polar configurations. The transversal component of the external magnetic field is responsible for the magneto-optical resonance near total internal reflection conditions, and the polar component reveals the resonance of the Tamm surface mode. Therefore, both surface- and bulk-associated features are present in the magneto-optical spectra of the p-polarized light. View Full-Text Keywords: optical sensor; photonic crystal; surface optical wave; magneto-optics; transverse magneto-optical Kerr effect; Faraday effect

Official source

https://infoscience.epfl.ch/record/283899?ln=fr

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Concepts associés

Chargement

Publications associées

Chargement

Magnetic spin–orbit interaction of light

Maria-Pilar Bernal, Hans Peter Herzig, Myun Sik Kim, Huihui Lü

We study the directional excitation of optical surface waves controlled by the magnetic field of light. We theoretically predict that a spinning magnetic dipole develops a tunable unidirectional coupling of light to transverse electric (TE) polarized Bloch surface waves (BSWs). Experimentally, we show that the helicity of light projected onto a subwavelength groove milled into the top layer of a 1D photonic crystal (PC) controls the power distribution between two TE-polarized BSWs excited on both sides of the groove. Such a phenomenon is shown to be solely mediated by the helicity of the magnetic optical field, thus revealing a magnetic spin-orbit interaction of light. Remarkably, this magnetic optical effect is clearly observed via a near-field coupler governed by an electric dipole moment: it is of the same order of magnitude as the electric optical effects involved in the coupling. This opens up new degrees of freedom for the manipulation of light and offers desirable and novel opportunities for the development of integrated optical functionalities.

Nature Publishing Group2018

Chargement

Propriétés magnétiques de nanostructures de cobalt adsorbées

Nicolas Weiss

This thesis reports results on magnetic properties of supported cobalt nanostructures. The nanostructures were grown on single crystal metal surface by Molecular Beam Epitaxy in an Ultra High Vacuum chamber. Our experimental setup is based on two in situ measurement techniques. The first is the Scanning Tunneling Microscope (STM) allowing to investigate the nanostructure morphology. The second, called Surface Magneto-Optical Kerr Effect (SMOKE), probes the magnetism of the nanostructures. By combining the data obtained with both techniques we were able to investigate the magnetism of 2D nanoparticles down to the atomic level. The first aim of the thesis consisted in disclosing the role played by the differently coordinated atoms in determining the Magnetic Energy Anisotropy in 2D nanostructures. To this purpose, we performed experiments on the Co/Pt(111) system, chosen as a model system since the Pt surface is well known to increase the out-of-plane uniaxial anisotropy as well as the magnetic moment of the Co islands. A preliminary work has been devoted to the growth of the Co islands as a function of the deposition and annealing temperatures. As a result, we learned to grow three different island's shapes : ramified, compact and double-layer islands. We then concentrated on the magnetism of these islands. Due to the nonlinear relationship between perimeter length and surface area, we were able to distinguish the different contributions to the anisotropy energy of surface and perimeter atoms. We found that the magnetic anisotropy in 2D Co nanostructures is predominantly due to the low-coordinated edge atoms, for which the anisotropy energy can be as large as 20 times the bulk value. This finding opens new possibilities to separately tune the anisotropy and moment of nanostructures. To exemplify this, and to illustrate once more the role of perimeter atoms, we produced Co island with a non-magnetic Pt core. As expected, these bimetallic islands have identical anisotropy and lower magnetic moment to their equally shaped pure Co counterpart. The second aim we focused on was the investigation of the magnetic properties of ultra-high density arrays of nanostructures created by self-assembly. We chose Co/Au(788) as a model system since the nanoscopic Co dots were found to have a very narrow size distribution and to be placed onto a lattice which is phase coherent on a macroscopic length scale. Moreover, the array has a density of 26 Tdot/in2 which allows the investigation of inter-particle interaction in ultra high density arrays. We showed that the narrow size distribution of the dots corresponds to an unprecedented narrow Magnetic Anisotropy Energy distribution with 35% width at half of the maximum. Moreover, we demonstrated the weak magnetic coupling between the Co dots despite their high density. In parallel to these fundamental researches, we developed a new experimental setup that will replace the current one. We designed a UHV chamber equipped with a homemade variable temperature STM combined with a SMOKE experiment. A quadrupole, focused on the sample, generates a 0.35 T magnetic field. This field is one order of magnitude larger than the present one and can be uniformly rotated in the plane of the quadrupole. Furthermore, the design of the new chamber allows STM imaging in this magnetic field. In this report, we present the adopted solutions as well as the first tests of the components (STM, SMOKE, cryostat).

EPFL2004

Chargement

Information about the poloidal field inside the plasma and about the current density profile is essential for the understanding of the behavior of tokamak plasmas. The poloidal field outside the plasma edge is easily measured by a set of magnetic coils, whereas measurements of the magnetic field distribution inside the plasma requires dedicated and often complex diagnostic systems. One of the methods is polarimetry using beams of electromagnetic waves traversing the plasma. It makes use of the fact that the magnetic field modifies the refractive index of the plasma and as a consequence affects the state of polarization of the passing waves. Specifically, Faraday rotation refers to the case of a linearly polarized wave propagating parallel to a magnetic field. In this case, the rotation of the polarization vector is proportional to the product of electron density and parallel magnetic field component. This thesis is devoted to the design of a specific polarimeter system and its implementation on the TCV tokamak. The conceptual design took into account the particular requirements of the TCV experiments and its experimental program with particular interest in measurements of current density profiles in low-density, EC-heated plasmas. Aiming at optimum performance of the polarimeter in this parameter range, the FIR laser wavelength of 432.5 µm was chosen. Since TCV is already equipped with an interferometer (at 214 µm) for measurements of the line-integrated density along 14 chords, the polarimeter was built as a separate instrument. The number of 10 spatial channels to cover the plasma diameter was found as a compromise between desired spatial resolution, access constraints and cost. The measurement of the Faraday rotation angle is based on a method suggested by Dodel and Kunz [1], which uses optical beams with rotating linear polarization. In this case, the Faraday rotation angle is retrieved from a phase measurement comparing the modulated signals from the probe detectors with that from a reference detector and to first order is insensitive to amplitude variations of the signals. Waveguide detectors based on Schottky barrier diodes are used as detectors for their sensitivity and large electrical bandwidth. Signal processing and analysis is performed in two branches : a) using specifically built analog electronic phase detectors followed by slow (250 kHz) ADCs b) using fast (5 MHz) ADCs and numeric signal processing on a mainframe computer. The thesis covers the description of the design and the various components of the polarimeter, presents initial tests and an evaluation of its performance based on simulations using real plasma configurations of TCV. The analysis of specific tests with the system installed on TCV revealed the presence of perturbations leading to parasitic contributions to the measured phase angles. The results of first measurements of the Faraday rotation angle for different plasma conditions on TCV are presented. Comparing the measured Faraday rotation angles with the results of calculations showed qualitative agreement, in particular the effects of an increase in electron density and of the reversal of the current direction were clearly seen. The system is also capable to detect a radial displacement of the magnetic axis of the plasma, as was demonstrated by comparing measurements from two specific plasma configurations. However, the absolute values still show significant deviations from the expected ones based on calculations. The discrepancies increase with increasing Faraday angle and depend on the direction of the plasma current. At high electron densities beam refraction becomes a problem and may lead to significant errors in the measurements and eventually to complete loss of the signal in several channels. In its present status, the polarimeter cannot yet provide results that are suitable to reconstruct the poloidal field or the current density profile of the plasma. Tentative explanations for this problem are given, but further specific tests are necessary to confirm them. Even in its present state, the polarimeter may be used to detect transient relative changes in the profiles of electron density and current. This was demonstrated by a series of experiments in plasmas with sawtooth activity. Comparing the signals from the polarimeter with those from other multi-chord diagnostics (interferometer and soft X-ray detectors) clearly revealed correlations but also specific differences. These experimental studies showed that the Far-Infrared Polarimetry still requires further improvements, but has potential to become a valuable diagnostic capable of directly measuring the current density profile in the TCV tokamak.

EPFL2011

Chargement

Propriétés magnétiques de nanostructures de cobalt adsorbées

Nicolas Weiss

EPFL2004

EPFL2011