Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...
The Fe-14Cr-2W-0.3Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS) reduced activation ferritic (RAF) steel was fabricated by mechanical alloying of a pre-alloyed, gas atomised powder with yttria nano-particles, followed by hot isostatic pressing and ther ...
The structure and phase stability of binary tungsten-vanadium and tungsten-tantalum alloys are investigated over a broad range of alloy compositions using ab initio and cluster expansion methods. The alloys are characterized by the negative enthalpy of mix ...
Recrystallization characteristics of severe cold rolled Cu-0.23 vol%Al2O3 alloy were investigated through the examination of properties and microstructure. A special change of mechanical and physical properties was observed during the annealing process, wh ...
This thesis investigates nine new compositions of the ternary Au-Cu-Pt system, containing from 75 to 78 wt% Au with 0 to 15 wt% Pt, by means of in-situ synchrotron radiation X-ray diffraction, differential scanning calorimetry, transmission electron micros ...
Degradation of mechanical properties due to nanometric irradiation induced defects is one of the challenging issues in designing ferritic materials for future nuclear fusion reactors. Various types of defects, namely dislocation loops, voids, He bubbles an ...
In order to better understand the microstructure that forms during laser welding of an 18 carat gold and an austenitic stainless steel, solidification of the Au-Fe binary analog has been studied using thermal analysis and interrupted Bridgman experiments. ...
This work is motivated by an industrial interest in gaining a better understanding of the phase transformations that govern the mechanical properties of 18-carat gold alloys commonly used in jewelry applications and luxury watchmaking. These alloys fall in ...
As the upper temperature for use of reduced activation ferritic/martensitic steels is presently limited by a drop in mechanical strength at about 550 degrees C, Europe, Japan and the US are actively researching steels with high strength at higher operating ...
This article describes the microstructure and Charpy impact properties of an Fe-14Cr-2W-0.3-Ti-0.3Y(2)O(3) oxide dispersion strengthened (ODS)-reduced activation ferritic (RAF) steel, manufactured either from elemental powders or from an Fe-14Cr-2W-0.3Ti p ...
