Progress in Violet Light-Emitting Diodes Based on ZnO/GaN Heterojunction

Progress in light-emitting diodes (LEDs) based on ZnO/GaN heterojunctions has run into several obstacles during the last twenty years. While both the energy bandgap and lattice parameter of the two semiconductors are favorable to the development of such devices, other features related to the electrical and structural properties of the GaN layer prevent an efficient radiative recombination. This work illustrates some advances made on ZnO/GaN-based LEDs, by using high-thickness GaN layers for thep-region of the device and an ad hoc device topology. Heterojunction LEDs consist of a quasicoalesced non-intentionally doped ZnO nanorod layer deposited by chemical bath deposition onto a metal-organic vapor-phase epitaxy -grown epitaxial layer ofp-doped GaN. Circular 200 mu m-sized violet-emitting LEDs with ap-ncontact distance as low as 3 mu m exhibit a turn-on voltage of 3 V, and an emitting optical power at 395 nm of a few microwatts. Electroluminescence spectrum investigation shows that the emissive process can be ascribed to four different recombination transitions, dominated by the electron-hole recombinations on the ZnO side.

Realization and study of InAs/GaAs quantum dot superluminescent diodes emitting at 1.3µm

Marco Rossetti

A quantum dot is a semiconductor nanostructure that confines the motion of conduction band electrons and valence band holes in all three spatial directions, thus creating fully discrete energy levels. The confinement in the InAs/GaAs material system is generated by the bandgap difference for the two materials (∼ 0.4 eV for InAs, and ∼ 1.4 eV for GaAs) which provides a minimum of potential energy for both electrons and holes inside the InAs nanoparticle. The appearance of new nanoscale effects modifies the electro-optical properties of such a system which makes possible the improvement of existing device performance or even fascinating novel device applications. For the creation of coherent structures with very high purity and high density, as it is required for application in light emitting devices, self-assembling is a very important pathway. The quantum dot creation mostly relies on the relaxation of the strain accumulated during the growth of lattice mismatched materials, which happens in a non-equlibrium condition. This results in a statistical distribution of all the parameters characterizing the InAs nanocrystals as size, composition and strain, whose direct manifestation is the inhomogeneously broadened light emission deriving from quantum dot ensembles. At the dawning of the quantum dot development the broadening was considered as a limiting factor for application in semiconductor lasers. Today, it is considered favorably for all the applications where a broad gain spectrum is required as optical amplifiers, monolithic and external-cavity tunable lasers, and superluminescent diodes. The objective of this thesis is the application of InAs/GaAs self-assembled quantum dots to the active region of high power and broad-band superluminescent diodes emitting in the 1.3 μm wavelength region. Superluminescent diodes are edge-emitting semiconductor light sources based on the amplification of spontaneous emission along a waveguide where optical gain is achieved through current injection. They combine the high power and brightness of laser diodes with the low coherence of LEDs. The latter is a fundamental feature for the application in optical coherence tomography medical imaging, where the image resolution is related to the spectral bandwidth of the light source used. The achievement of bandwidths larger than 100 nm are demonstrated in this work through the optimization of molecular beam epitaxy growth conditions. This may be done optimizing the statistical size-dispersion of the dot ensemble, or through the use of different dot layers emitting at slightly different wavelengths. The large bandwidth emission is obtained also due to the peculiar energy structure of this material, for which a multi-state emission appears under particular injection conditions. As a term of comparison, best commercial single-chip superluminescent diodes for the imaging application at 1.3 μm show bandwidths around 60 nm. Moreover, the discrete nature of the energy levels in InAs quantum dots together with the implementation of a GaAs-based technology can be beneficial for the device temperature stability (the competing technology, based on InP, suffers from strong thermal degradation). The analysis and understanding of the device temperature characteristics will be detailed in the last chapter of the manuscript. Even though standard devices show an important temperature dependence, a better stability may be achieved through the use of p-doped active regions. In the last few years quantum dot devices have shown outstanding properties if compared to the competing quantum well technology. Low threshold currents, high temperature stability and low chirp in lasers, large bandwidths and low gain saturation in amplifiers have been demonstrated. However, in spite of the large interest among the scientific community, many of the microscopic processes at the origin of the electro-optical characteristics of this material are not completely understood yet. The physics of the quantum dot active material, will be modeled in this work through the use of systems of rate equations with different complexity depending on the system they are applied to. We will provide a mean-field rate equation model allowing to get insights about carrier dynamics in QD lasers. Also, we will develop two different traveling-wave rate equation models, one for the modeling of the L-I characteristics and the other for the modeling of the spectral characteristics of quantum dot superluminescent diodes. Considering the carrier and photon density distributions across the device cavity is essential in superluminescent diodes, where the high single pass gain results in large non-homogeneities of photon and carrier distributions. The work is motivated by an industrial cooperation with EXALOS AG, a leading company in the development, manufacturing, and sales of broadband superluminescent diodes.

EPFL2007

Time-resolved spin processes in Alq(3) light-emitting diodes

Jean-Philippe Ansermet, Francesco Comandè

Using pulsed electroluminescence detected magnetic resonance (PELDMR), we study the dynamics of spin processes in Alq(3) based light-emitting diodes. The transitions induced by magnetic resonance are found to be much faster than the space charge reaction time that is measured by looking at the electroluminescence frequency response to an ac bias voltage. This observation excludes a change in the equilibrium space charge distributions as the cause of PELDMR, in favor of a change of the electron-hole recombination rate. At low temperatures the effect of electron spin resonance on the electroluminescence changes sign and lasts longer. The postpulse electroluminescence recovery is well fitted by a biexponential function characterized by two very different time scales, which are consistent with a detailed balance for the singlet and triplet states, in conformity with the electron-hole pair model.

Amer Physical Soc2014

Ultrafast spectroscopy of wide bandgap semiconductor nanostructures

Mehran Shahmohammadi

Group III-nitrides have been considered a promising choice for the realization of optoelectronic devices since 1970. Since the first demonstration of the high-brightness blue light-emitting diodes (LEDs) by Shuji Nakamura and coworkers, the fabrication of highly efficient white LEDs has passed successful developments. A serious physical issue still remained, which prevents their use for high power and highly efficient LEDs: the drop of external quantum efficiency (EQE) of III-nitride LEDs when increasing the driving current, the so-called ''efficiency droop'' problem. In order to have a fast expansion to the lighting market, the cost-per-lumen of packaged LEDs must rapidly decrease. This indeed demands for having LED chips operating with high EQE under the high current operation. Besides the industrial interest of III-nitrides, owing to their large direct bandgap, they feature some interesting optical properties such as large exciton binding energy and large oscillator strength of excitons. However, when the carrier density raised in a semiconductor, a transition should occur from an insulating state consisting of a gas of excitons to a conductive electron-hole plasma, that is called the Mott transition. This crossover can drastically affect the optical and electrical characteristics of semiconductors and may, for instance, drive the transition from a polariton laser to a vertical cavity surface-emitting laser. More interestingly, even if biexcitons are frequently seen to dominate the emission of III-nitride heterostructures when the density is raised, no clear experimental report is available on the role of biexcitons in the Mott transition in a two-dimensional (2D) nanostructure. In the first part, the emission properties of high-quality GaN/AlGaN single quantum wells (QWs) at high-carrier densities are examined. They are of crucial importance to provide a deeper insight into the operating conditions of III-nitride based lasers and LEDs, as well as the transition from strong to weak coupling regime of exciton-polaritons in semiconductor microcavities. Employing the same technique then to investigate some InGaN/GaN QWs, the droop signature was investigated comprehensively in both polar and non-polar QWs. Having an accurate estimation of the carrier density in the QWs, the contribution of several non-radiative processes were quantitatively examined. These experiments can indeed provide a deeper insight on the physical phenomena responsible for the efficiency droop in III-nitride LEDs, and can stimulate several theoretical and experimental on this subject. The second part focuses on the transport mechanisms of excitons in ZnO and III-nitride based nano-structures. The transverse movement of donor-bound excitons in a purely bent ZnO microwire as a function of temperature have been investigated, owing to the high spatial, spectral and temporal resolutions of our original time resolved cathodoluminescence system. The movement mechanism was modeled by a hopping process of excitons. Our results pave the way to new experiments allowing to reveal the physics at play at the nanoscale in different materials. However, in case of highly disordered systems, one should take into account more complex considerations, as in the case of InGaN core-shell QW structures studied in the last chapter, the large energy fluctuations prevent excitons to move along the energy gradient at low temperatures.