Design and Simulation of Gamma Spectrometry Experiments in the CROCUS Reactor
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microchemistry and the microstructure, and, as a consequence, ...
The effective fraction of delayed photoneutrons (ph) has been theoretically defined and experimentally determined in various different configurations of the LWR-PROTEUS critical facility. The peculiarity lies in the fact that the reactor has D2O in only on ...
The electromagnetic standing wave becomes one of the main sources of plasma nonuniformity in large area capacitively coupled rf reactors. In cylindrical reactors with a central rf connection or one-dimensional linear reactors with rf connections at both ex ...
Feasibility Study of Shaped Electrode The objective of this project was a feasibility study of a novel, large-area plasma reactor for thin film production, based on a shaped electrode technique ("lens") to compensate the standing wave non-uniformity. Cyli ...
High-resolution gamma spectroscopy was performed on individual fuel rods of a fresh, highly heterogeneous Boiling Water Reactor (BWR) fuel assembly, after irradiation at low power in the PROTEUS reactor at PSI, to determine the ratio of neutron captures in ...
The effects of neutron irradiation on austenitic stainless steels, usually used for the manufacturing of internal elements of nuclear reactors (e.g. the core shrouds), are the alteration of the microstructure, and, as a consequence, of the mechanical prope ...
Fuel rods with burnup values beyond 50GWd/t are characterised by relatively large amounts of fission products and a high abundance of major and minor actinides. Of particular interest is the change in the reactivity of the fuel as a function of burnup and ...
The electromagnetic standing wave effect can become the main source of nonuniformity limiting the use of very high frequency in large area reactors exceeding 1 m(2) required for industrial applications. Recently, it has been proposed and shown experimental ...
Nuclear materials have been successfully employed in commercial fission reactors for many decades. Research and material development for advanced fission system and future thermo-nuclear fusion reactors have acquired maturity while great challenges remain ...
Oxide dispersed strengthened (ODS) ferritic-martensitic steels are investigated as possible structural material for the future generation of High Temperature Gas Cooled Nuclear Reactors. The Ni based austenitic ODS superalloys are not considered, because o ...
