Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718
Publications associées (52)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The Lucerne University of Applied Sciences has been analysing and monitoring the low- temperature district heating and cooling network (LTN) “Suurstoffi” since 2012. The analysis showed that heating demand was twice as high as expected. On the other hand, ...
This paper investigates the influence of thermal lag on the glass transition temperature of polymers measured under different heating rates during dynamic mechanical analysis (DMA). The E-modulus-temperature curves of a two-component epoxy adhesive and a p ...
Molecular dynamics simulation is used to study the formation of the a(0) < 1 0 0 > binary dislocation junction in body-centered cubic Fe. Results show that under an applied strain two intersecting 1/2 a(0) < 1 1 1 > dislocations, one mobile edge and one im ...
Nowadays, one of the main alternatives for a more rational use of energy in heating applications is the heat pumping technologies. The market is dominated by two kinds of heat pump systems: the electrically driven vapor compression heat pumps (EHP), which ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
A heating stage has been developed to perform in-situ annealing in a SEM equipped with an EBSD system in order to study recrystallization mechanisms. High temperature treatments could then be performed inside the SEM, up to 1180°C and with high heating and ...
This paper presents a systematic approach for abstracting the flexibility of a building space heating system and using it within a composable framework for real-time explicit power control of microgrids and, more in general, active distribution networks. I ...
Elongated coarse P{011}-oriented grains are frequently observed after annealing of cold-rolled Al–Mn alloys with a highly supersaturated solid solution level. In this study, important factors affecting the strength of the P-texture component after ann ...
The optimization of powders preparation and consolidation process leads to the achievement of a high thermoelectric figure of merit (ZT=1.25 at 800°C) in an n-type silicon-germanium (SiGe) alloy hot pressed at low heating rate. It has been experimentally o ...
We report here on an integrated mini-lamp module (15x26x4 mm3) with a microfabricated rf-powered Rb dielectric barrier discharge (DBD) lamp (10x10x3 mm3) positioned on top of a 0.6 mm thick (thickness adjustable) 4-layer LTCC (Low Temperature Co-fired Cera ...