Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the ...
Laser-induced CVD has been used to produce Pt lines on pyrex glass substrates by means of platinum bis(hexafluoroacetylacetonate) as precursor. The effect that writing speed has on the line geometry and resistivity was studied, as well as the influence of ...
An argon laser is used to induce Laser Chem. Vapor Deposition (LCVD) of platinum using platinum bihexafluoroacetylacetonate as precursor. The process can be photolytic or pyrolytic depending on the laser power used. These processes are studied by recording ...
Laser generated defects in (Al,Ga) As have been investigated by photochemical wet etching and TEM measurements. Photoetching reveals a 500 nm wide zone in the center of the processed area where according to laser power either a luminescent or a nonradiativ ...
Springer-Verlag (Springer Series in Chemical Physics 39)1984
The measurement of the tokamak plasma ion temperature can be obtained by collective Thomson scattering. This method requires a far infrared laser to achieve useful spatial resolution for typical tokamak plasma parameters. The very low Thomson scattering cr ...
A model which takes into account the main phenomena occurring during the laser-cladding process is proposed. For a given laser power, beam radius, powder jet geometry, and clad height, this model evaluates two other processing parameters, namely, the laser ...
The present work is part of a feasibility study to investigate the excimer laser photon-assisted thermal decompn. of anthracene at 248 nm. The principle is to combine UV photons of an appropriate light source and heat in an incinerating reactor at modest t ...
A laser-induced depostion technique is used to produce platinum interconnection lines for microelectronic applications. The influence of the laser power as well as the vapor pressure of the precursor upon the geometry, the morphol. and the line resistivity ...
Microscopic ohmic contacts are made by laser chem. vapor deposition of platinum on a Pyrex substrate. The elec. cond. of the deposited metal stripes is measured as a function of the laser power, the writing speed, and the organometallic vapor pressure. The ...
Fiber gratings irradiated by CW-laser show a breaking strength and a lifetime performance similar to that of pristine fiber, on pulsed KrF-laser irradiation. In this paper we report on the mechanical reliability of fibers irradiated by UV light using the s ...
