Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Structural components used in civil engineering applications are often subjected to compressive loads. Unlike the tensile strength of fiber-reinforced polymer (FRP) materials, their compressive strength is resin-dominated, exhibiting lower values and more ...
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
The material characterization of steel fibre reinforced concrete (SFRC), which is required for its implementation in design codes, should be based on nominal properties that describe its post-cracking strength in tension. In the case of brittle and quasi-b ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the initial fibre dosage and final fibre distribution and orientation in the cast element. According to the final fibre distribution an ...
A model for predicting composite material strength degradation under elevated and high temperatures is proposed. This model is based on the morphology of the mixture of materials in different states. The degradation of resin-dominated shear strength can be ...
2009
,
In this paper an extensive research campaign aimed to define the mechanical performance of earth block masonry panels is presented. Uniaxial compression and diagonal compression tests were performed. The test results confirmed the brittle behaviour of eart ...
2014
, , ,
Thin-ply composites are rapidly gaining interest in the composite industry, not only because of the larger design possibilities that they offer, but also because of positive size effects that have been shown to improve performance in various loading condit ...
Elsevier2014
Mechanical properties of nanostructures could be remarkably different from their bulk counterparts owing to scale effects, which have attracted considerable research interest in recent years. However, nanomechanics studies are hindered by the difficulties ...
EPFL2010
Primary load-bearing glass constructions are often subjected to relatively important in-plane loads, transferred through so-called point-fixed connections. The according in-plane load introduction, structural resistance and failure mechanisms have been stu ...
