Isogeometric Kirchhoff-Love shell patches in free and forced vibration of sinusoidally corrugated FG carbon nanotube-reinforced composite panels
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
We study mechanical reinforcement in a widely used epoxy matrix with the addition of graphene nanoplatelets (GnPs) and various mixture ratios of carbon nanotubes (CNTs) with GnPs. Two different dimensions of GnPs were used with flake sizes of 5 mu m and 25 ...
We demonstrate a high efficiency perovskite solar cell with a hybrid hole-transporting material-counter electrode based on a thin single-walled carbon nanotube (SWCNT) film and a drop-cast 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluoren ...
Synthesis and characterization of polymer-based composites containing carbon nanostructures is the focus of this dissertation. The main polymer which has been used for this research is SU8. The motivation of the work is to overcome the drawbacks of SU8 e.g ...
The thin films techniques applied to Superconducting RF (SRF) have a long history at CERN. A large panel of cavities has been coated from LEP, to LHC. For the current and future projects (HIE-ISOLDE, HL-LHC, FCC) there is a need offurther higher RF-perform ...
Grafting carbon nanotubes (CNTs) directly on carbon fibers represents a promising approach in order to strengthen the weak interface between carbon fibers and polymer matrix in carbon fiber reinforced polymer composites (CFRCs). We have carried out direct ...
We have characterized the electrical conductivity of the composite which consists of multi-walled carbon nanotubes dispersed in SU8 epoxy resin. Depending on the processing conditions of the epoxy (ranging from non-polymerized to cross-linked), we obtained ...
Composites based on polydiphenylamine (PDPA) doped with heteropolyanions of H3PW12O40 and single-walled carbon nanotubes (SWNTs) were prepared by electrochemical polymerization of diphenylamine (DPA) on carbon nanotube films deposited onto Pt electrodes. H ...
Polycrystalline zinc oxide (ZnO) films, prepared by low-pressure chemical vapor deposition are investigated in this thesis. ZnO belongs to the class of transparent conductive oxide materials, as it is transparent to light from the visible to the near-infra ...
Accurate and versatile three-dimensional writing of individually controlled conducting polymer nanodevices forming dense arrays is demonstrated by guiding a monomer meniscus in pulling a micropipette during oxidative polymerization. We specifically demonst ...
The dynamic identification of a historical masonry palace located in Benevento (Italy) has been carried out. The case study is representative of many buildings located in historic Italian centres. Since the building has been instrumented by the Department ...
