Seismic retrofitSeismic retrofitting is the modification of existing structures to make them more resistant to seismic activity, ground motion, or soil failure due to earthquakes. With better understanding of seismic demand on structures and with our recent experiences with large earthquakes near urban centers, the need of seismic retrofitting is well acknowledged. Prior to the introduction of modern seismic codes in the late 1960s for developed countries (US, Japan etc.) and late 1970s for many other parts of the world (Turkey, China etc.
Seismic loadingSeismic loading is one of the basic concepts of earthquake engineering which means application of an earthquake-generated agitation to a structure. It happens at contact surfaces of a structure either with the ground, or with adjacent structures, or with gravity waves from tsunami. Seismic loading depends, primarily, on: Anticipated earthquake's parameters at the site - known as seismic hazard Geotechnical parameters of the site Structure's parameters Characteristics of the anticipated gravity waves from tsunami (if applicable).
Aléa sismiquevignette|Ceinture de feu du Pacifique L'aléa sismique est la probabilité qu'un séisme destructeur de caractéristiques données (exprimées en général par des paramètres tels que l’accélération, la période de récurrence, l’intensité, le spectre de réponse...) se produise dans une région donnée pendant une période donnée. Il ne doit pas être confondu avec le risque sismique qui est la probabilité qu'un séisme engendre des destructions et fasse des victimes. Ce risque est une combinaison de .
Seismic analysisSeismic analysis is a subset of structural analysis and is the calculation of the response of a building (or nonbuilding) structure to earthquakes. It is part of the process of structural design, earthquake engineering or structural assessment and retrofit (see structural engineering) in regions where earthquakes are prevalent. As seen in the figure, a building has the potential to 'wave' back and forth during an earthquake (or even a severe wind storm). This is called the 'fundamental mode', and is the lowest frequency of building response.
Loi de Hall-PetchIn materials science, grain-boundary strengthening (or Hall–Petch strengthening) is a method of strengthening materials by changing their average crystallite (grain) size. It is based on the observation that grain boundaries are insurmountable borders for dislocations and that the number of dislocations within a grain has an effect on how stress builds up in the adjacent grain, which will eventually activate dislocation sources and thus enabling deformation in the neighbouring grain as well.
Construction parasismiquethumb| La Tokyo Skytree, la deuxième plus grande tour au monde (derrière le Burj Khalifa) qui, du haut de ses , a parfaitement résisté au séisme de 2011 de magnitude 9, démontrant l'efficacité des constructions parasismiques japonaises. La construction parasismique ou construction antisismique est la réalisation de bâtiments et infrastructures résistant aux séismes. Elle implique l'étude du comportement des bâtiments et structures sujets à un chargement dynamique de type sismique.
Solid solution strengtheningIn metallurgy, solid solution strengthening is a type of alloying that can be used to improve the strength of a pure metal. The technique works by adding atoms of one element (the alloying element) to the crystalline lattice of another element (the base metal), forming a solid solution. The local nonuniformity in the lattice due to the alloying element makes plastic deformation more difficult by impeding dislocation motion through stress fields. In contrast, alloying beyond the solubility limit can form a second phase, leading to strengthening via other mechanisms (e.
Sismologiethumb|Station sismologique Basse-Terre au sommet du morne Mazeau en Guadeloupe. La sismologie ou séismologie (ce dernier est un anglicisme de seismology) est une discipline scientifique qui étudie les séismes (tremblements de terre) et la propagation des ondes élastiques (dites ondes sismiques) à l'intérieur de la Terre. La sismologie moderne utilise les concepts de la mécanique newtonienne appliqués à la connaissance de la Terre.
Plancher bétonLes planchers de béton sont des éléments structurels de plancher réalisés à partir d'éléments préfabriqués ou non, essentiellement dont le principal matériau mis en œuvre est le béton. Les planchers en béton se divisent en quatre groupes principaux : Les éléments de plancher en béton Les éléments de plancher en béton cellulaire Les prédalles Les poutrains et claveaux Disponibles en béton armé ou précontraint, ce type d'éléments préfabriqués, plus communément appelés hourdis, est une solution idéale pour poser un plancher de façon simple, rapide et extrêmement solide.
Seismic vibration controlIn earthquake engineering, vibration control is a set of technical means aimed to mitigate seismic impacts in building and non-building structures. All seismic vibration control devices may be classified as passive, active or hybrid where: passive control devices have no feedback capability between them, structural elements and the ground; active control devices incorporate real-time recording instrumentation on the ground integrated with earthquake input processing equipment and actuators within the structure; hybrid control devices have combined features of active and passive control systems.
