Seismic vibration control | EPFL Graph Search

In earthquake engineering, vibration control is a set of technical means aimed to mitigate seismic impacts in building and non-building structures. All seismic vibration control devices may be classified as passive, active or hybrid where:

passive control devices have no feedback capability between them, structural elements and the ground;
active control devices incorporate real-time recording instrumentation on the ground integrated with earthquake input processing equipment and actuators within the structure;
hybrid control devices have combined features of active and passive control systems.

When ground seismic waves reach up and start to penetrate a base of a building, their energy flow density, due to reflections, reduces dramatically: usually, up to 90%. However, the remaining portions of the incident waves during a major earthquake still bear a huge devastating potential. After the seismic waves enter a superstructure, there is a number of ways to control them in or

Vibration Suppression Through Variable Stiffness and Damping Structural Joints

Gennaro Senatore

This paper introduces a new semi-active strategy for vibration control of truss and frame structures equipped with variable stiffness and damping joints which consist of a shape memory polymer (SMP) core reinforced by an SMP-aramid composite skin. When the joints are actuated to the transition temperature through thermal actuation, the SMP core transitions from a glassy to a rubbery state through a viscoelastic region, which causes a stiffness reduction and an increase of damping. The mechanic behavior of the joint can be thought of as transitioning from a moment to a pin connection. This way, it is possible to cause a shift of the structure natural frequencies and to increase damping, which is employed to obtain a significant reduction of the dynamic response. This paper comprises two parts: (1) characterization of a variable stiffness and damping material model through experimental testing; (2) numerical simulations of a truss bridge and a four-story frame, which are equipped with variable stiffness and damping joints. The truss bridge (case A) is subjected to a resonance and a moving load while the four-story frame (case B) is subjected to El Centro earthquake loading. For case A under resonance loading, the dynamic response can be reduced exclusively through a frequency shift and ignoring viscoelastic effects. For case A under moving load and case B under earthquake loading, vibration suppression is mostly caused by the increase of damping due to viscoelastic effects. Control time delays due to joint heating have been included in the analysis. When the joints are actuated to the transition range 55°C–65°C, which is specific to the SMP adopted in this study, the acceleration peak amplitude reduces by up to 95% and 87%, for case A and case B, respectively. For both cases, damping increases by up to 2.2% from undamped conditions (25°C). This work has shown that the adoption of variable stiffness and damping structural joints has great potential to enable a new and effective semi-active control strategy to significantly reduce the structure response under a wide range of dynamic loading conditions.

2020

Dynamic behavior and vibration control of a tensegrity structure

Nizar Bel Hadj Ali, Ian Smith

Tensegrities are lightweight space reticulated structures composed of cables and struts. Stability is provided by the self-stress state between tensioned and compressed elements. Tensegrity systems have in general low structural damping, leading to challenges with respect to dynamic loading. This paper describes dynamic behavior and vibration control of a full-scale active tensegrity structure. Laboratory testing and numerical simulations confirmed that control of the self-stress influences the dynamic behavior. A multi-objective vibration control strategy is proposed. Vibration control is carried out by modifying the self-stress level of the structure through small movement of active struts in order to shift the natural frequencies away from excitation. The PGSL stochastic search algorithm successfully identifies good control commands enabling reduction of structural response to acceptable levels at minimum control cost. (C) 2010 Elsevier Ltd. All rights reserved.

Elsevier2010

Vibration Suppression Through Variable Stiffness and Damping Structural Joints

Gennaro Senatore

2020