ECO2 framework assessment of limestone powder concrete slabs and columns
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The temperature is known to influence the strength and durability of concrete. Temperature has also a great influence on the creep of cementitious materials. Previous investigations have not provided a complete understanding of these effects; in particular ...
A novel clinker with low Ca/Si ratio and low sintering temperature was synthesized, and the property of the clinker was tested. A clinker sintered from industrial raw materials mainly contains rankinite (Ca3Si2O7), pseudowollastonite (Ca-3(Si3O9)) and ferr ...
This dissertation originates from an investigation about the arising of the modern, German building expertise involving the use of concrete, which develops during the first three quarter of the 19th century against the backdrop of a general modernisation p ...
Controlled low-strength material (CLSM) mixture design remains a trial-and-error process. A new approach using relative proportioning of the constituent materials instead of prescribed mass contents is proposed. Relative proportions allow for independent a ...
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...
A preliminary assessment of conditions for the industrial manufacture of a new cementitious system based on clinker-calcined clay and limestone, developed by the authors, referred as "low carbon cement" is presented. The new cement enables the substitution ...
The increasing volume of European transport urgently requires an effective road and rail system in Central European and Eastern Countries (CEEC) with a major investment in building new and assessing and rehabilitating old structures. Following 5 successful ...
Alkali-activatedslag(AAS) binders are obtained by a manufacturing process less energy-intensive than ordinary Portland cement (OPC) and involves lower greenhouse gasses emission. These alkaline cements allow the production of high mechanical strength and d ...
High-performance concrete is sensitive to early-age cracking, mainly due to its rapidly-developing autogenous shrinkage. Autogenous shrinkage and internal relative humidity (RH) decrease are direct consequences of the emptying of capillary pores due to cem ...
Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...
