ECO2 framework assessment of limestone powder concrete slabs and columns
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This dissertation originates from an investigation about the arising of the modern, German building expertise involving the use of concrete, which develops during the first three quarter of the 19th century against the backdrop of a general modernisation p ...
A novel clinker with low Ca/Si ratio and low sintering temperature was synthesized, and the property of the clinker was tested. A clinker sintered from industrial raw materials mainly contains rankinite (Ca3Si2O7), pseudowollastonite (Ca-3(Si3O9)) and ferr ...
Controlled low-strength material (CLSM) mixture design remains a trial-and-error process. A new approach using relative proportioning of the constituent materials instead of prescribed mass contents is proposed. Relative proportions allow for independent a ...
Calcium aluminate cements (CAC) are often used in combination with calcium sulfate and Portland cement for special applications where rapid setting, rapid drying and shrinkage compensation are required. A growing fraction of the clinker, which has the high ...
A preliminary assessment of conditions for the industrial manufacture of a new cementitious system based on clinker-calcined clay and limestone, developed by the authors, referred as "low carbon cement" is presented. The new cement enables the substitution ...
High-performance concrete is sensitive to early-age cracking, mainly due to its rapidly-developing autogenous shrinkage. Autogenous shrinkage and internal relative humidity (RH) decrease are direct consequences of the emptying of capillary pores due to cem ...
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...
Alkali-activatedslag(AAS) binders are obtained by a manufacturing process less energy-intensive than ordinary Portland cement (OPC) and involves lower greenhouse gasses emission. These alkaline cements allow the production of high mechanical strength and d ...
The increasing volume of European transport urgently requires an effective road and rail system in Central European and Eastern Countries (CEEC) with a major investment in building new and assessing and rehabilitating old structures. Following 5 successful ...
The temperature is known to influence the strength and durability of concrete. Temperature has also a great influence on the creep of cementitious materials. Previous investigations have not provided a complete understanding of these effects; in particular ...
