Micromechanics of oxide inclusions in ferrous alloys
Publications associées (50)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...
We have prepared multiwalled carbon nanotube (MWCNT)/In2O3 composites using a simple impregnation method. The precursor compound indium(III) chloride (InCl3) was used to cover the surface of MWCNTs and distilled water was used as solvent. The applied mass ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
Calcium-containing slag material is produced in iron- and steelmaking worldwide, including Finland. One process route utilizing this calcium, being developed towards large-scale application, is the so-called slag2pcc concept. Using ammonium salts, up to 50 ...
Villigen PSI, World Resources Forum, printed by Paul Scherrer Institute2015
For the highly loaded pressure tunnels and shafts that are used for the extension of storage power plants with pumped storage and to increase installed capacity, alignments of the waterway system with high overburden are of great importance from the econom ...
The mechanism of the capacity degradation of LaNi5-based alloy electrodes was investigated with a special focus on the influence of the alloy and surface composition, as well as the unique structure obtained by gas atomisation. The electrochemical properti ...
W-2Y, W-1Y(2)O(3) and W-2Y(2)O(3) materials have been fabricated using two different powder metallurgy methods. While W-2Y and W-1Y(2)O(3) have been fabricated using mechanical alloying and hot isostatic pressing (Hipping), W-2Y(2)O(3) has been fabricated ...
The remarkable microstructural stability of high chromium steels prepared by powder metallurgy and strengthened by dispersion of nanometric yttrium oxides in cyclic loading at high temperatures is reported. Contrary to the continuous cyclic softening and p ...
Since materials science is of great importance, the application of composite materials based on carbon nanotubes (CNTs) is widely investigated. Current work is aimed at preparing nanocomposites of TiO2/MWCNT using an impregnation method combined with slow ...
PROBLEM TO BE SOLVED: To provide an endosseous implant having a modified surface for fixation of an artificial tooth in dentistry and of a hearing aid to replace or reinforce a bone with damage or disease in orthopedic surgery.SOLUTION: An endosseous impla ...