Micromechanics of oxide inclusions in ferrous alloys
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In the quest of materials for the first wall of the future fusion reactor, it has been shown that oxide dispersion strengthened (ODS) ferritic / martensitic (F/M) steels appear to be promising candidates. The inherent good mechanical properties supported b ...
In the present work, CeO2 nanopowder was synthesized via a reverse precipitation method using CeCl3 center dot 7H(2)O, NH4OH and sodium dodecyl sulfate as raw materials. The effect of thermal treatment on the crystal growth, surface area and chemical bonds ...
In this work a combination of advanced transmission electron microscopy and spectroscopy techniques enabled a statistically significant analysis of various types of few nanometer size oxides particles in Fe-14Cr-2W-O.3Ti-0.3Y(2)O(3) ferritic steel. These m ...
Background: Focused electron beam induced deposition (FEBID) is a direct-writing technique with nanometer resolution, which has received strongly increasing attention within the last decade. In FEBID a precursor previously adsorbed on a substrate surface i ...
The formation of feathery grains during semi-continuous casting of Al-alloys [1, 2] is an interesting problem from both practical and theoretical points of view. These structures are formed by a lamellar sequence of twinned and untwinned regions separated ...
The microstructure of titanium alloys (Ti–1Al–1Mn, Ti–6Al–4V) nitrided under glow discharge was characterised using light microscopy, X-ray diffraction and analytical electron microscopy. The investigations revealed a complex multilayered microstructure pr ...
The present study investigated the role of alloy microstructure and surface roughness on wear and friction behavior of leaded and unleaded tin bronzes. Ball-on-disk experiments were carried out under dry conditions with steel balls sliding against bronze d ...
The microstructure, chemical and phase composition of the hard Ni-P-Ti layer formed on the Ti-6Al-4V alloy after duplex surface treatment were investigated by light microscopy, X-ray diffraction, scanning electron microscopy and analytical/high-resolution ...
The photocatalytic activity of TiO2–SiO2-coated cotton textiles was investigated through the self-cleaning of red wine stains. It was shown that a TiO2–SiO2 species could be produced at temperatures of 100 °C with acceptable photo-activity on non-heat resi ...
We have demonstrated a GaN/AlGaN quantum cascade detector based on a simplified design of the extractor region relying on an AlGaN thick layer. The device grown by molecular beam epitaxy exhibits both TM-polarized intersubband absorption and photocurrent a ...
