Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Experimental squeeze flow results show that the behaviour of concentrated short fibre suspensions and concentrated long fibre suspensions impregnated with polymer melts are qualitatively different. Short fibre suspensions have a low yield stress, have an o ...
The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer pre ...
A multiscale approach to composite failure, in which detailed information on small-scale micromechanics is incorporated approximately yet accurately into larger-scale models capable of simulating extensive damage evolution and ultimate failure, is applied ...
Particle reinforced composites are produced by infiltrating ceramic particle beds with 99.99% Al. Resulting materials feature a relatively high volume fraction (40-55 vol. pet) of homogeneously distributed reinforcement. The evolution of damage during tens ...
A micromechanically based model for the deformation, strength, and stress-rupture life of a ceramic-matrix composite is developed for materials that do not degrade by oxidative attack. The rupture model for a unidirectional composite incorporates fiber-str ...
A process has been developed where multiple yarns of commingled glass and polypropylene are heated and placed to a desired geometry. The placed unidirectional (UD) tow is then encapsulated by over-moulding with glass mat thermoplastics (GMTs). The effects ...
The mode I inter-laminar fracture toughness of advanced knitted textile composites was investigated. Two complex weft-knitted glass fabrics were selected for the study: a triple rib knit and a Milano knit were impregnated with a tough epoxy resin and teste ...
Low-cycle fatigue failure in titanium metal matrix composites is caused by two separate damage mechanisms: fatigue crack growth in the Ti matrix and fiber breakage. Here, a coupled numerical model for predicting both crack growth and fiber breakage is deve ...
The present paper addresses the correlation between mechanical damage and the change in electrical resistance of CFRP under tensile loading. A linear relation between the strain and the electrical resistance of single carbon fibers was obtained experimenta ...
A new numerical model is proposed for simulating the mechanical behavior of unidirectional composites which is based on a three-dimensional (3D) shear-lag model. The 3D shear-lag model considers the micro-damage phenomena of interfacial debonding and inter ...
