Quantitative study of the thickness-dependent stress in indium tin oxide thin films
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Mechanical properties of nanostructures could be remarkably different from their bulk counterparts owing to scale effects, which have attracted considerable research interest in recent years. However, nanomechanics studies are hindered by the difficulties ...
The resistance as well as strain hardening and softening properties of UHPFRC depend on the type of matrix and mainly on the fibre dosage and final distribution and orientation in the element. The strength and deformability distribution in a thin UHPFRC pa ...
Japan Concrete Institute (JCI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
Drying shrinkage is modeled at a microscale as a two-stage process of deformation and evacuation of a two-tube vessel system, based on porosimetry evolution. In the first stage water flow is driven by an external evaporation flux. Flow is associated with a ...
A model based on the Euler-Bernoulli theory is used to assess the sensitivity of residual stresses in solid oxide fuel cells to the mechanical properties and geometry of the constituents. It considers different cell configurations, characterised by the pre ...
Primary load-bearing glass constructions are often subjected to relatively important in-plane loads, transferred through so-called point-fixed connections. The according in-plane load introduction, structural resistance and failure mechanisms have been stu ...
Uniaxial quasi-static tensile testing on individual nanocrystalline Co nanowires (NWs), synthesized by electrochemical deposition process (EDP) in porous templates, was performed inside a scanning electron microscope (SEM) using a microfabricated tensile s ...
The constant improvement of polymer composite materials has allowed their integration in many industrial fields where their mechanical and chemical properties are apparently attractive. Mixed metal-composite insulators are now increasingly used for high vo ...
The influence of internal stress anisotropy resulting from anisotropic loading in a roll-to-roll (R2R) process, and polymer substrate anisotropy on the crack onset strain (COS) of thin oxide coatings was analyzed. Experimental data obtained for R2R process ...
Diamond reinforced metals with a diamond content of 55-60 vol.% were made by gas driven liquid metal infiltration. They were characterized with regard to their stiffness, strength and fracture toughness as a function of diamond particle size and matrix all ...
The extremely low permeability of Ultra-High Performance Fibre Reinforced Concretes (UHPFRC) associated to their outstanding mechanical properties make them especially suitable to locally "harden" reinforced concrete structures in critical zones subjected ...