Composition and Element Distribution Mapping of γ′ and γ" Phases of Inconel 718 by High-Resolution Scanning Transmission Electron Microscopy and X-ray Energy-Dispersive Spectrometry
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This study investigates the microstructure and properties of functionally graded NiTi alloy bilayers. The NiTi layer is printed by laser powder bed fusion on a NiTiX (where X is Hf or Cu) substrate prepared by vacuum arc remelting. Specimens produced with ...
Analytical scanning and transmission electron microscopy were used to study the microstructure of Ce,Er-doped Na0.5La0.5MoO4 laser crystals. Crystals were grown by the Czochralski method from the melts with a nominal composition of Na0.5La0.5−xCexEr0.005Mo ...
Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...
SPRINGER HEIDELBERG2022
,
The influence of post-heat treatment on the microstructure and properties of 4D printed Fe-17Mn-5Si-10Cr-4Ni (wt. %) shape memory alloy (SMA) produced via a laser powder bed fusion process is investigated in this study. It is shown that heat-treatment temp ...
DC reactive magnetron sputtered Nb2AlyNx coatings with various Al contents (y/(y + z)) ranging from 0 to 0.75 were deposited using different ratios of the currents applied to the Al and Nb targets in order to systematically control their chemical compositi ...
Defects are key to enhance or deploy particular materials properties. In this thesis I present analyses of the impact of defects on the electronic structure of materials using combined experimental and theoretical Electron energy loss spectroscopy (EELS) i ...
The response of Y2O3 nanoprecipitates in a 1-mu m YBa2Cu3O7-x layer from a superconducting wire Ag/YBCO/buffer metal oxides/Hastelloy to 107 MeV Kr and 167 MeV Xe ion irradiation was investigated using a combination of transmission electron microscopy, dif ...
2018
,
This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...
PERGAMON-ELSEVIER SCIENCE LTD2021
Metal additive manufacturing (AM) offers the possibility to rapidly produce complex geometries that are not achievable with conventional manufacturing methods. The two most common technologies, Laser Powder Bed Fusion (LPBF) and Direct Metal Deposition (DM ...
EPFL2022
,
One-dimensional microrods (4-5 mm) of PbI2 and CH3NH3PbI3 (MAPbI(3)) with unique structural and morphological properties have been grown at room temperature. X-ray diffraction (XRD) patterns of both types of micro-rods exhibit a hexagonal system (P3m1(164) ...
